Help, I can't specifiy the correct part

[joetiii]

So my car is out of the paint shop and ready to reassemble. we're going to start with the interior trim for the Targa bar after the rear window goes in. We got the parts together for the install, new rubber seal and we discovered the other seal I ordered isn't what we need.

When the car came apart, the chrome surround sits over the window rubber. Then there is a chrome trim piece that runs along the bottom of the window under the rubber seal but on top of the body window channel. It starts at the stainless targa bar and goes back and wraps around back of the window where it disappears under the rear window seal. There is a thin seal that goes between this chrome trim and the body. This is what I need.

At first, I thought it would be the 1/4 window moulding sealing tape, but thats too thick. Now I'm thinking its the rear roll bar bead but I'm not sure. Any catalog I check out does not show this chrome strip or the seal. Can anyone help me out on this?

[ThomasTe]

You need some sealing strap of the same type as for the front fenders. Porsche list a seal strap for the front fenders, part number 000.043.129.00

I used a good quality standard sealing strap.