Routing through rear bulkhead of '66 911?

[BillC]

Howdy,

I'm finally making progress on my long-term '66 911 restoration project. Unfortunately for me, I bought the car already disassembled, and now that I'm finally getting to the point of putting it back together, I'm not sure where everything goes.

I've been able to figure most things out from searching books or the internet. However, I haven't been able to find out exactly which thing comes out through which hole in the rear bulkhead at the back of the center tunnel. I have attached a photo in which I've labeled those things I'm sure about. What comes through the other holes?

Are the following guesses correct?
#2 -- accelerator rod
#3 -- brake line
#4 -- speedometer cable
#5 -- wiring harness

Also, I have no idea what #1 or #6 are for. Do they just get plugged?

Thanks,
Bill

[Alan.uk]

Hi,

1) is the fuel line

6) is the brake line

3) is the feed to the starter motor.

The rest is correct.

HTH

Alan

[BillC]

Excellent! Thank you very much.

Just to confirm, and to complete the pic, here's an updated pic. Please let me know if I have it right.

[Alan.uk]

Hi Bill,

That's all correct. I am sure I have some pictures some where and when I find them I will send them to you.

HTH

Alan

[super9064]

Welcome to the forum, now post some pictures of the rest of the car

[BillC]

Hi Bill,

That's all correct. I am sure I have some pictures some where and when I find them I will send them to you.

HTH

Alan

Wonderful! Thank you.

Welcome to the forum, now post some pictures of the rest of the car

Well, it's still got a long way to go and isn't much to look at. But, since you asked, here's a couple of pics with replacement rear quarter panels installed.

[Bill Simmeth]

That ^^^ is a terrific reference. Thanks for that!

[kenikh]

That ^^^ is a terrific reference. Thanks for that!

I was thinking the same thing! Awesome!