Primary distributor wires

[dummkopf]

'72 911S. I can't figure it out, I've done a search here and looked in my Haynes manual. But no luck. The manual shows a diagram but no colors.

So the signal from the distributor goes to the CDS box and then back to the coil, right?

I don't want to screw anything up so I am stuck at this point. Any help would be greatly appreciated!

[304065]

a= achtung = 360V will kill you, goes to coil "A"
b= batterie = +12V switched
c= contact = wire to points
d= earth= ground =brown wire

[dummkopf]

Thank you so much for the diagram. That helps. Saved it and can zoom in which is awesome compared to the manual.

Just looked at it and the box has those colors but the wire ends do not. Fixing to strip the tape off and see what's up.