**found what I need**. 67 911S cylinder heads wanted. I need a set of 6 heads in core condition, nothing seriously damaged. I will take complete or bare heads but I need x6.
Thanks
Mark
Printable View
**found what I need**. 67 911S cylinder heads wanted. I need a set of 6 heads in core condition, nothing seriously damaged. I will take complete or bare heads but I need x6.
Thanks
Mark
I have a complete 67S longblock freshly built.
$35K
Erik - (303) 443-1343 ext. 2
Hi
Are 68S head OK for you? (I may have 4 ou 5 only)
Regards
Christophe
yes 67 or 68 are fine. Dates are not as important.
Will also consider 69T heads or 914-6 heads with the 42mm intake valves
Hey Mark
What about a set of 2.0E heads with the 42 mm intake valves? I have a few sets of those.
Thanks for replying guys, so far I am hoping to stick with 1967 or 1968 heads for carburetors no injection port holes, 42x38mm valve sizing. Preferred part numbers are: 901.104.305.02 or 901.104.005.02 or 901.104.035.02