experts needed !! 911 G modell Lightweight aluminium steering wheel 3 spoke

experts needed !!

Porsche G-modell steering wheel

what i know :

- aluminium build steering wheel
- non centre hub ( same as the 2.7 Carrera and 3.0 turbo FAT Steering wheels )
- longer NO grips on the side of the steering wheel ( alu)
- steering wheel alu weight 1.45 KG hornbutton 320 Grams
- steering wheel na weight 1.95 KG hornbutton 410 Grams

first thought was that is used to be a FAT 2.7 carrera / 3.0 turbo steering wheel but they are thicker and made like the normal steering wheel

maybe 3.0 RS ? ... who know something about it !!
if you want any close up picture's from a area feel free to ask

Attachment 363334Attachment 363335Attachment 363336Attachment 363337Attachment 363338

Attachment 363339Attachment 363340Attachment 363341Attachment 363342

Attachment 363343Attachment 363344

I'm certainly no expert but I don't think you have anything special. I've had a few of those in the past. I don't remember but is is entirely possible that they came on 928s.

Regards

Jim
PS: I pretty certain that I have one of those things still hanging around here. I'll try and find it.

Keep in mind if it's 928 it's a smaller shaft size than 911.

these are both the g-modell size shaft ( 21 MM)
i do have another aluminium steering wheel in ( 17 MM)
but it's seems odd to safe over 600 grams in total only on the steering wheel if it was for normal production ( because alumium was expensive compare to steel)
but maybe they have done it for 1-2 years in normal production... you never know with the guys from weissach

but would like to know everything there is to know :)

Quote:

---

Originally Posted by Frank Beck

Keep in mind if it's 928 it's a smaller shaft size than 911.

---

No Frank, 928s have the same size shaft. 924/944/968/964,993 etc, etc have a smaller shaft.

Ciao

Jim

My mistake Jim. Should have known better than to go up against you.

OP, if you find the G spot I believe you will also discover what this wheel fits.

Seems a normal 74/75 2.7 carrera wheel to me (in the photo it seems thicker than the one on the right)...but don't know if they were aluminum in the first place. Has it a part number on it?

I think the same kind of wheel was used on 934's, and certainly others cars.
https://photos.stuttcars.info/445/__...c99c289a90.jpg