One thing John has always had with this car was to have the balls to take Ruprecht outside the box.
Printable View
Seat belt/harness brackets with the crush sleeves.
http://i7.photobucket.com/albums/y25...oore/02-23.jpg
yeah.. actually, i am going to have to agree with Dave and change my mind. I was under the assumption the car was undertaking rally tones since i saw the partition and other rally bits. i wouldnt go with either as they interrupt the lines too much, and there isnt much going back once they are in (even with a rally theme).. but if you are to choose one over the other i stick with latches (if you must).
this arrived today in the mail.
http://a2.sphotos.ak.fbcdn.net/hphot..._2004701_n.jpg
bad part is, it's Missy's birthday and she thought it might be something for her.. :o looks like i've got some more stuff to do for her birthday :rolleyes:
another goodie on its way..
this guy arrived today and replaced the black plastic version i had for the last few years. finally after years of searching, i can now have a genuine metal vintage stoddard license plate frame. representin' the buckeye state.
http://farm7.static.flickr.com/6127/...ec2c414839.jpg
thanks Raj! now i just need to start making a bracket for my trip meter... :rolleyes:
A month to the day since the last post on this thread............and that's just wayyyyy too long for this wonderful thread to be dormant.
Recently a thread titled " Need help with a MOMO hub " engaged my interest. I'm nowhere near, nor will I ever be, the steering wheel fanatic Morrissey is, but the subject of changing wheels resonated with me.
I have several wheels by different manufacturers but not all have the same bolt pattern, therefore, when changing wheels, I sometimes also had to change hubs. Over time I have distilled my steering wheels down to a couple of MOMOs and a pair if Nardis.........but they have different bolt patterns, - in both, the bolt circle diameter and the position of the six holes.
To solve my predicament, Jeffrey Fellmann @ Classico Wheels promptly fabricated a custom made , alum. billet hub for me, drilled for both makes of wheels and it works perfectly & is of far higher quality than either manufacturer's hubs.....couldn't be happier. I initially had it powder-coated in a crinkle finish ( as shown ), but recently stripped it and applied a different finish.