Hello everyone
I need some help. I am looking for what holds down the wooden floor board on the drivers side floor pan on a 1966MY
Any pictures would be greatly appreciated
Is there a part number
Thank you in advance
Doug
Printable View
Hello everyone
I need some help. I am looking for what holds down the wooden floor board on the drivers side floor pan on a 1966MY
Any pictures would be greatly appreciated
Is there a part number
Thank you in advance
Doug
Hold down plate (901.501.390.00) & floor board weld in bracket: http://www.restoration-design.com/st...H?Search=PP228
Pedal Board ('83 SC); similar plate/bracket shown under "10mm nut".
Yes the plate is riveted to the pedal board on drivers side
Here are some photos of 304598, a June 1966 built car. The first are from when I got the car, seven years ago the last from as it was last month...
Attachment 462778
Attachment 462779
Attachment 462780
Attachment 462781
Work is being done by Rivard Competition... on the site as Rivard...
For early cars also on the left (driver) side the (pedal) board is fixed with RD P228. There is nothing riveted to the pedal board at the bottom.
This is a picture from my Aug 66 model 67 pedal board all original:
Attachment 462782
So I had two RD P228 in my car with washer and nut.
Only at the right passenger side I had RD P228R. At the left driver side it is like pictured above (thread).
Here is a shot of P228 holding in the pedal board:
Attachment 462783