What is LH?
Printable View
What is LH?
Langheck
Means "long tail" in German. There were two 906s: the short tail and long tail.
Thanks.
What type of heads did the 906/Carrera 6 engines have?
They had the 2 liter deep dome head profile and 38mm ports. I [i]think[/] they had 45I/39E valves like the '69S heads, but they might have been smaller. If so the only difference between the 906 and '69S heads would be the ports and twin plugs. Some had MFI ports, some did not.
With the exception of a 906 Mag Crankcase and the 906 Mag Upper Valve Covers...
I have the rest of the 906 factory parts so I can build a correct factory motor, several parts are in fact NOS; 906 Center-Lube Camshafts, 906 Center-lube Chain-Boxes and Covers, 906 Mag Intakes, 906 Early Marelli Twin-Plug Distributor, 906 Ti Rod Thrust Bearings, 906 Flywheel, 906 Clutch Disc and Pressure Plate and a set of 906 Cylinders to name a few. This is the results of many years of collecting all the right parts.
Can anyone help me source a pair of OEM 906 Mag Upper Valve Covers? :rolleyes: I gave up on finding the crankcase.
I can be reached directly via email at AJSERRANO at MSN dot COM. Thank you for your help.
PS: Recently I was fortunate to sourced a pair of 906 Mag Lower Valve Covers, the 906 Motor Mount and Twin Marelli Coils with Ballast Resistors. Below is a nice pix of a 906 motor recently taken at the Collier Museum.
Attachment 454853
Attachment 454852
906 Mag Valve Covers recently sourced.
Attachment 454854
906 Mag Motor Mount recently sourced.
Attachment 454855
906 Marelli Twin-Coils
Attachment 454858
I also have the 906 exhaust, very cool pieces indeed--and they fit my 914-6 GT for that real authentic 906 sound! :D
Attachment 454857
Here is a sample pix of the 906 Mag Upper Valve Covers I'm missing. Anyone?
Attachment 454856
Thx!
Some detailed photos of the 906 (1966) Twin Plug Racing Heads...
Bruce Anderson book.
Attachment 455779
906 Twin Plug Racing Head - NOS
Attachment 455780
Attachment 455781
906 Twin Plug Racing Head - Casting Number
Attachment 455783
906 Twin Plug Racing Head - Casting Date
Attachment 455782
906 Twin Plug Racing Head, ATE Intake / Exhaust Valves, NOS (for lash-caps)
Attachment 455784
906 Twin Plug Racing Head, ATE Intake / Exhaust Valves, NOS (for lash-caps)
Attachment 455785
Attachment 455787
Free bump!
These are 914-6 GT Twin-Plug Racing Heads. Same as '906', same casting numbers, but with a later casting date code of 09 69.
The 906 heads were removed from a factory 914-6 GT race motor many years ago.
Attachment 455793
They became available and I made the purchase.
Attachment 455794
Same 906 / GT heads at Ollie's for restoration.
Attachment 455788
Attachment 455789
Attachment 455790
Attachment 455791
Note the casting number and production date. For a 914-6 GT.
The 906 plastic cars were long gone at this point, but their racing parts production legacy continued in other models.
Attachment 455792
https://imagizer.imageshack.com/v2/xq90/924/b9DQ97.jpg
Do you have any detailed dimensions for these valves as we are planning to manufacture the 'solid' rockers later this year and I think that these valves differ from stock valves in their length above the keeper grooves.
It would be good to know as it may be worth trying to source the correct valves.
Valves are approx 2mm shorter, when at my notes I'll confirm. Early and late castings differ, in provisions for air injection and MFI casting boss as models for street and racing advanced. Having rebuilt 3 R drive trains in the last 10 years I accumulated a base of knowledge. Gordon
A few of my measurements with a dial-caliper from a collection of 906 ATE Valves I have.
Keep in mind that these are used valves and the stem may have been ground.
Besides all that, my measurements at the time were done rather quickly, taken only for a point of reference.
Intake ATE 3056 - 45mm / 111mm
Attachment 455809
Attachment 455810
Attachment 455811
Attachment 455812
Intake ATE 3057 - 39mm / 111mm
Attachment 455813
Attachment 455814
Attachment 455815
Attachment 455816
...more to follow.