Results 1 to 3 of 3

Thread: Fs: 1970 911e

  1. #1
    Senior Member CamBiscuit's Avatar
    Join Date
    May 2006
    Location
    Adelaide, Australia
    Posts
    1,447

    Fs: 1970 911e

    Porsche 1970 911E Sportomatic

    Originally UK delivery in bahia red with black interior, sunroof, power windows and tinted windows.
    Current SA rego
    Delivered with export plates so suspect not too long in the UK.
    Non matching 3.2 ROW (231hp) engine and 915 box. Supposedly out of a low mileage Hong Kong car. Starts first time, pulls hard, makes no nasty noises and doesn’t blow smoke. Had the Mark Poole nod of approval.
    Car has BF Torino sport seat replicas with houndstooth.
    Vintage Momo Jacky Ickx 350mm wheel.

    Issues
    Small rust patch on the roof, otherwise solid. A little bit of minor surface rust starting to show in passenger door bottoms (inside of door bottom looks fine) and small rust mark on paint at base of passenger side windscreen but no bubbling. Passenger sill has small visible hole. You'd install new sills prior to painting anyway. Floors are solid.

    Some bright spark drilled a hole through part of the VIN. Thankfully it’s through the ‘11’ part of the VIN. Obviously the LWB cars all started with 911 as the first 3 numbers of the VIN so its obvious what it is. All other VIN numbers clear and legible and the car has its original delivery booklet.

    It had a full brake bleed, new outer spring plate bushes, new oil tank S hose, and the engine had a full major service (MP) before coming to Darwin with maybe 400km’s since.
    Car has had a full going over by auto electrician at a cost of $3700. Everything works as it should, fuse boxes removed and bead blasted to remove corrosion before reinstalling, any hacks sorted back to factory.

    The original anodise appears to be un-scuffed under the black paint on the window frames.

    The parts I have to go with the car are:

    • New Koni rear shocks and Koni front struts (painted) without inserts.
    • Fully refurbed S calipers by PMB Performance
    • 6 x 15 deep six Fuchs x 4 in polished finish.
    • Good black vinyl rear seats
    • Re-trimmed door panels, rear shelf, interior Ό window trims, door pockets with mounting hardware and new silver trim in box, both interior arm rests / door pulls, knee pads, ashtray, door tops.
    • Repair piece for ashtray mount & ashtray clip
    • 2 x new front guards
    • Long hood with catch mechanism
    • Slam panel Vin plate
    • Excellent early engine grill
    • 2 x secondhand rear quarters. Have had orig. flare sections removed and re-welded at some point.
    • Front bumper with over riders (no trim)
    • New front indicator housings and new silver trim lenses
    • Rear bumpers with over riders & centre panel, new bumper trim and reflectors
    • Re anodized door strikers
    • New Porsche Durant mirror
    • S/hand Gold PORSCHE decklid script & 911E Badge + glove box badge
    • New alloy dash trim with new basket weave
    • New early style electric window switches
    • New engine sound pad by Eric Linden ($450US)
    • Nth Hollywood Speedo refurbed oil level / fuel gauge
    • 2 x new battery straps
    • New washer bottle, pump cap etc
    • Elephant Racing front control arm bushes, camber plate bushes and Turbo tie rods

    Asking $65,000 O.B.O

    Ph 0448 Eight Eight Two 399

    As part of the deal I might be prepared to load the ute and car trailer and travel......
    Attached Images Attached Images
    Looking for engine # 6208151
    '74 RS 3.0 Replica
    '70 911E Bahia Red (SOLD)
    '71 911 S/T Replica 2.3 Twin plug BEAST (SOLD)
    Australian TYP 901 Register #78
    Early S Registry # 1076

  2. #2
    Senior Member CamBiscuit's Avatar
    Join Date
    May 2006
    Location
    Adelaide, Australia
    Posts
    1,447
    I should add I have the HVAC blowers and plenums etc which were removed to allow the auto electrician access.

    The blue plate is a QLD modification plate for some old seats that were in the car when the previous owner bought it which are long gone...
    Attached Images Attached Images
    Looking for engine # 6208151
    '74 RS 3.0 Replica
    '70 911E Bahia Red (SOLD)
    '71 911 S/T Replica 2.3 Twin plug BEAST (SOLD)
    Australian TYP 901 Register #78
    Early S Registry # 1076

  3. #3
    Senior Member CamBiscuit's Avatar
    Join Date
    May 2006
    Location
    Adelaide, Australia
    Posts
    1,447
    Sssssssold
    Looking for engine # 6208151
    '74 RS 3.0 Replica
    '70 911E Bahia Red (SOLD)
    '71 911 S/T Replica 2.3 Twin plug BEAST (SOLD)
    Australian TYP 901 Register #78
    Early S Registry # 1076

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.