I do not know if these photos were already uploaded.
[COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR][COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR]
I do not know if these photos were already uploaded.
[COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR][COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR]
Last edited by _gonbau; 06-15-2019 at 03:27 AM.
Baudett // https://www.instagram.com/Baudett_canarias/
the prototype of 914 had the fins welded to the body ...?Some information about this car
http://www.early911sregistry.org/forums/attachment.php?attachmentid=189506&stc=1&d=1310924 454
http://www.early911sregistry.org/for...tion-car/page6
+
What can the number 44 mean at the door of my car?
Last edited by _gonbau; 06-17-2019 at 04:35 AM.
Baudett // https://www.instagram.com/Baudett_canarias/
Can anyone tell me if this piece belongs to the equipment of the S or belongs to the donor engine of the SC that my father bought?
I have also found several loose cables ...
+
Last edited by _gonbau; 07-03-2019 at 02:03 PM.
Baudett // https://www.instagram.com/Baudett_canarias/
Any advice to lower the engine and leave the transmission inside?
I understand that I can follow the descent procedure without having removed the upper screws of the motor / trans mount? and that halfway through I could finish removing them?
Baudett // https://www.instagram.com/Baudett_canarias/
I have been able to dismantle everything, now I
just need to remove it from the drawer.Motor break: The part that connects to the selector rod. From the engine in the clutch area ... you move that area and it sounds a metallic noise apart from being able to move it a couple of mm ...What can be?
Last edited by _gonbau; 07-08-2019 at 05:28 PM.
Baudett // https://www.instagram.com/Baudett_canarias/
Any idea of the breakdown?
+
Last edited by _gonbau; 07-07-2019 at 12:19 PM.
Baudett // https://www.instagram.com/Baudett_canarias/
dismount clutch disc ... to see what I find?
Baudett // https://www.instagram.com/Baudett_canarias/
I have disassembled the clutch disc, but I find that I do not have the tool to remove the bolts from the head to get to the crankshaft ... I read on pelicanparts that I do not try another tool and I will not. Any store or idea that can be used? Online store to buy the head?
Baudett // https://www.instagram.com/Baudett_canarias/
I found some rust, last photo. Something to worry about? Something to keep in mind about the bomb?
+
Last edited by _gonbau; 07-11-2019 at 08:19 AM.
Baudett // https://www.instagram.com/Baudett_canarias/
Baudett // https://www.instagram.com/Baudett_canarias/