Does anybody have close-up pics of the set-up for 1973? Thanks
Does anybody have close-up pics of the set-up for 1973? Thanks
Member #2768 http://www.no-speedlimit.it
- 1973 Biancaneve - 911 2.4 S/F Ivory
- 1977 Fiona - 911 Carrera 3.0 Oak Green Metallic
- 1993 Bellatrix - 964 Turbo 3.6 Black
I keep a registry of 1972 and 1973 2.4 S coupé chassis. Infos always welcome!!!
very thin birch plywood sort of an angle cut at the end didn't fully fit into the puch in the carpeting. I'd send you a pic, but I used mine to get out of a ditch and never replaced it.
David
'73 S Targa #0830 2.7 MFI rebuilt to RS specs
Aase Sales has them.
www.Aasesales.com
Thanks to all for contribution!
Member #2768 http://www.no-speedlimit.it
- 1973 Biancaneve - 911 2.4 S/F Ivory
- 1977 Fiona - 911 Carrera 3.0 Oak Green Metallic
- 1993 Bellatrix - 964 Turbo 3.6 Black
I keep a registry of 1972 and 1973 2.4 S coupé chassis. Infos always welcome!!!
I understood that the wooden piece and the pocket it is in was deleted some time in 1973MY and only regular non reinforced carpet was used. That is because I have a very late production 1973 E and have put a carpet with the wood piece in it but was told at the time that it was not strictly correct. I would love to know for certain from anyone who can say for certain I am sure someone on the board knows.
Hugh Hodges
73 911E
Melbourne Australia
Foundation Member #005
Australian TYP901 Register Inc.
Early S Registry #776
Good question Hugh....
I trust the 16 year old trunk carpet that was in my car when I bought it was original.... it was pretty toasted, but did have it's sewn sleeve and wood plank.
I've since replaced the carpet (twice) and made my own wood plank out of a piece of 1/8" Italian aircraft ply (something we had laying around the shop at work) and stained it black walnut.... looked very much like what was left of the original......
Again, mine is an April build '73......
Chuck Miller
Creative Advisor/Message Board Moderator - Early 911S Registry #109
R Gruppe #88
TYP901 #62
'73S cpe #1099 - Matched # 2.7/9.5 RS spec rebuild
'67 Malibu 327 spt cpe - Period 350 Rebuild
’98 Chevy S-10 – Utility
’15 GTI – Commuter
My Italian delivered, late '73 "S" has no sewn sleeve and wood plank either ... I'd appreciate too if anybody has an idea on when the transition happened ...
Member #2768 http://www.no-speedlimit.it
- 1973 Biancaneve - 911 2.4 S/F Ivory
- 1977 Fiona - 911 Carrera 3.0 Oak Green Metallic
- 1993 Bellatrix - 964 Turbo 3.6 Black
I keep a registry of 1972 and 1973 2.4 S coupé chassis. Infos always welcome!!!
The RS book says on page 116 that from may 15 1973 "no pocket or wooden panel for luggage compartment mat". However I am not sure if this was across all cars or only RS cars on that day. We do know that for some components such as the AG KG change on the aluminum data plates the RS's changed at a different date to other cars. however for this change I would think it may have applied across the model range at the same time. However I have never been able to get any other confirmation than the RS book reference
Hugh Hodges
73 911E
Melbourne Australia
Foundation Member #005
Australian TYP901 Register Inc.
Early S Registry #776
I guess my car was produced in the first 2 weeks of May since I had a plank.
David
'73 S Targa #0830 2.7 MFI rebuilt to RS specs
Stupid question but.......what was the purpose of the wood plank?