Results 1 to 10 of 11

Thread: Should I be suspicious

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Should I be suspicious

    See my last entry as regards the proper front panel in '67

    Being the OCD person that I am, I am always looking for new additions to the 67 Targa threads that I started. Found this one that was sold some time in the past by what purports to be a classic auto dealership designed to provide investment grade autos. Nice looking car but as per the usual just another dealer refusing to post the VIN number. Have taken to enlarging picture of the front number plates to get the VIN. Sometimes it works; sometimes it doesn't. This car purports to be an "S" but when I enlarge the plate it is a six digit number without the S. Last digit looks fishy. Is this truly an "S" or am I missing something? See below. The quality of the pictures should allow further enhancement. What if anything should I do if something is not right.

    Name:  jenlarge.jpg
Views: 409
Size:  65.1 KBName:  i-gMp8M4b-X2.jpg
Views: 401
Size:  158.8 KBName:  i-3Xz7SMf-X4.jpg
Views: 418
Size:  84.0 KB
    Last edited by doigthom; 10-10-2018 at 10:18 AM.

  2. #2
    Banned
    Join Date
    Nov 2004
    Location
    Scottsdale, AZ
    Posts
    9,752

  3. #3
    Thanks for solving my self created mystery. Aluminum number plate just looks odd. Don't think I have seen one without the S stamped on it even if it is not artfully done. Sorry to raise suspicion on a fine look car. Already had it in my list from a different set of pictures. I even commented on the quality back then.

  4. #4
    I see one problem.
    Steve Shea #1 joined a long time ago
    58 speedster
    66 912
    67S
    73S
    97 VW eurovan
    1132 honda snowblower

    member Jackson Hole Ski Club

  5. #5
    What is the problem? But to my embarrassment I reviewed some of the picture I have collected. Looks like the earliest cars may have had the S struck next to the VIN number. However at some point it looks like the number plate was change to actually be embossed with "911S" in the plate before they stamped the actual VIN number thereby avoiding the necessity of adding the "stamped" S. Guess it was the same old story. Heinz used whatever they had until they ran out and then used the newer version. Sorry for any confusion I have caused. I may be even wrong on this latest explanation after re exam. Probably just my stupidity and they never did stamp an S on the aluminum VIN plate although I found a thread about a change for '68S cars. Here is the plate from 500006S.Name:  image.jpg
Views: 314
Size:  86.7 KB

    Moe apologies!
    Last edited by doigthom; 10-08-2018 at 06:01 AM.

  6. #6
    Nothing related to the vin plate. The front panel with the drain/rib cutouts is not the right one for a 67.
    Steve Shea #1 joined a long time ago
    58 speedster
    66 912
    67S
    73S
    97 VW eurovan
    1132 honda snowblower

    member Jackson Hole Ski Club

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.