Page 1 of 2 12 LastLast
Results 1 to 10 of 32

Thread: Can this Leistritz be saved?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Can this Leistritz be saved?

    Have the engine out for a gearbox swap and noticed the muffler has really started to go downhill. It was stored for many years and is rusting from the inside out. 1969 date code. No dents, un-scraped square tip. Kind of nice other than the rust. Several years ago when I got it, it was just a few of pinholes which I filled with muffler cement (no, I didn't expect it to last).

    Hate to throw it out -- can a metal guy cut this open and patch the rot? The new Dansk repops sound awful.
    Attached Images Attached Images     

  2. #2
    Serial old car rescuer Arne's Avatar
    Join Date
    Aug 2011
    Location
    Eugene, OR
    Posts
    1,956
    IMO, it's done for. Just like rust anywhere else on a car, what you see on the outside is just the tip of the iceberg. Probably not a lot left inside other than rust.
    - Arne
    Current - 2018 718 Cayman, Rhodium Silver, PDK

    Sold - 1972 911T coupe, Silver Metallic; 1984 911 Carrera coupe, Chiffon white; 1973 914 2.0, Saturn Yellow; 1984 944, Silver Metallic

  3. #3
    Years ago, back when I lived in California, there was a guy in Torrance who specialized in repairing mufflers for vintage cars. Mostly Ferraris to my recollection. Gary something. Or Greg. Good guy. That doesn't answer your question other to say that muffler repair is certainly a thing. Now you just gotta hope someone is doing it in today's throw-away world.
    Last edited by Chuck Miller; 03-31-2019 at 05:18 PM.

  4. #4
    Moderator Chuck Miller's Avatar
    Join Date
    Oct 2002
    Location
    Reseda, CA.
    Posts
    12,419

    Lightbulb

    What's left of that muffler is tissue paper and is almost impossible to save...

    However, cut the off your early exit right at the canister and keep it. You might run into someone selling a first generation mid-year muffler (74-76) in good shape, and all you have to do is cut off the 'crooked' exit off the mid-year and weld your early exit on and you've got and 'newer' early muffler.... Like I did..

    Hope this helps,
    cm

    Yeah John, it was me who edited your above post....
    You want to talk about, PM me.....
    Chuck Miller
    Creative Advisor/Message Board Moderator - Early 911S Registry #109
    R Gruppe #88

    TYP901 #62
    '73S cpe #1099 - Matched # 2.7/9.5 RS spec rebuild
    '67 Malibu 327 spt cpe - Period 350 Rebuild

    ’98 Chevy S-10 – Utility
    ’15 GTI – Commuter

  5. #5
    Hardly. I'll look forward to your edit the next time someone makes a fun of Texas or Oklahoma.


    Ridiculous.

  6. #6
    Gene Smythe was the guy in Torrance repairing vintage mufflers back in the early 90's. Quick Google search shows nothing but maybe someone here will remember or know if he's still in business.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Location
    Chicago Area
    Posts
    5,433
    Quote Originally Posted by LiveFromNY View Post
    Hardly. I'll look forward to your edit the next time someone makes a fun of Texas or Oklahoma.


    Ridiculous.
    Your on a great roll John. Surprised you haven't been benched.
    Mike Fitton # 2071
    2018 911S Carrera White
    2012 991 Platinum Silver ( Gone)
    1971 911T Targa Bahia Red (Gone to France)
    1995 911 Carrera Polar Silver (Gone)

    No Affiliation with City of Chicago!

  8. #8
    This is why I rarely if ever sell used mufflers, they normally rust from the inside so even when they look ok from the outside the insides are almost always toast. People are never happy when they get one, so now I just say no.

    ---Adam
    If you're reading this and you are not yet an Early 911S Registry member, Join Now!
    Early 911S Registry Member 1372
    Check out Unobtanium-Inc.com
    New blog posts all the time!

  9. #9
    Afraid that muffler is gone.....my welder fab guy has brazed isolated pin holes, but there is a limit.
    Agree with Chuck! Save the tail pipe.
    Mark Smedley
    '59 VW Typ I
    '69 911T 2.7
    '86 930
    '04 GT3
    '16 Boxster GTS
    '08 MBZ AMG CLK 63 Black Series

  10. #10
    Quote Originally Posted by smedley View Post
    Afraid that muffler is gone.....my welder fab guy has brazed isolated pin holes, but there is a limit.
    Agree with Chuck! Save the tail pipe.
    We shall see. Metal guy is going to cut a window in it so we can see how bad the internals are. If it's tinworm city in there, I'll have him cut off the tailpipe and that will be that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.