Does anyone have a good picture of what the floor area were the side walls conform look like? The driver side, I would think, seats on the floor pan perimeter. But my rusty metal leads me down below the perimeter elevation.
the passenger side leads me to believe that it seats on the floor pan perimeter. were I have a drawn line.
Last edited by bob joyce; 06-11-2019 at 06:01 PM. Reason: more pictures
more pictures of 68
I will try to post driver side picture.
Good luck finding these pieces. Sent my originals to Restoration Design for them to take a computer copy. Probably not enough demand to actually produce them.
Got more photos if you need them. I think Porsche may still have revised, revised, revised, revised left side in Atlanta. Can probably "cut and paste".
doigthom …..Thank You.... The third picture in particular answered my question. My concern was how it was flanged and welding type. The picture shows the flange dropping down to the lowest part of the floor(driver side). and it appears that the upper areas are spot welded and the lower, on the floor and over the threshold flanges are segmented bead weld... would you concur that my observation is correct? thanks for the great pictures …. and yes, Restoration Design is adding more to its list and that by nature of low production , moves the production of these parts further out... Too bad, for I would like the rear bulk heads that are 2 year only..... I will fabricate the parts myself... in the end, save time by doing it rather than hunting for it.
Sorry but I don't do my own body work and I would hate to take you down the wrong path by confirming or denying. Picture looks like spot at the top but just not sure. You might reach out to Moito on this site. I think one or more of my photos came from him. Also ask Eric Linden if he has any of the rusted pieces you need. I got something from him that was a later version of the passenger's side but it had most of the compound curves. Also try Freisinger in Europe. I have seen a picture of a pile of parts. They were helpful when was looking for pistons.
Posting Permissions
Reply With Quote