FS: 911S Brake Piston, Ft, 48x34, 901.351.988.00, 911.351.918.00

[JimmyT]

These pistons replace:
PET '66-'69 911 Fig. 6-02-05, #22) 901.351.988.00 Piston, S-caliper, '69, no 'X' (= Early piston) Qty: 4 PCNA: NLA
PET '70-'73 911 Fig. 6-02-00, #22) 901.351.988.00 Piston, S-caliper, with 'X', -'70 (= Late piston) Qty: 4 PCNA: NLA
PET '70-'73 911 Fig. 6-02-00, #22) 911.351.918.00 Piston, S-caliper, '71-'72-, with 'X' (= Late piston) Qty: 4 PCNA: NLA

They feature:

* 908 profile with 20 degree surface step
* Lighter = 121.88 grams less than stock 911S
* Castellated design for reduced heat transfer from pad
* Titanium = Reduced heat transfer, improved corrosion resistance
* Machined for Knock-back assembly
* Reduced surface friction

Material: Titanium, Gr 5 (6AL-4V)
Finish: Ground
Coating: Diamond-Like Carbon (DLC)
Weight: 123.59 grams

They were used on:
PET '65-'69 911 Fig. 6-02-00, #09 901.351.975.10 Fixed calliper (sic), 911S, 69, front, left, without pad, for brake disc, vented Qty: 1
PET '65-'69 911 Fig. 6-02-00, #09) 901.351.975.10 Fixed calliper (sic), 911S, 69, front, left, without pad, for brake disc, vented Qty: 1

PET '70-'73 911 Fig. 6-02-00, #09) 901.351.975.10 Fixed calliper (sic), 911S, -71, front, left, without pad, for brake disc, vented Qty: 1
PET '70-'73 911 Fig. 6-02-00, #09) 901.351.976.10 Fixed calliper (sic), 911S, -71, front, right, without pad, for brake disc, vented Qty: 1

PET '70-'73 911 Fig. 6-02-00, #09) 901.351.935.00 Fixed calliper (sic), 911S, 72-, front, left, without pad, for brake disc, vented Qty: 1
PET '70-'73 911 Fig. 6-02-00, #09) 901.351.936.00 Fixed calliper (sic), 911S, 72-, front, right, without pad, for brake disc, vented Qty: 1

These take:

PET '66-'69 911 Fig. 6-02-05, #32 911.351.950.07 Set of brake pads, S-caliper, no mounting parts
PET '70-'73 911 Fig. 6-02-00, #31) 911.351.950.07 Set of brake pads, S-caliper, no mounting parts

The price is $56.44 each, $112.88 per caliper.

Shipping within the US is by choice of USPS Priority ($7.90) or Parcel Post (~$4.50).
International shipping is available. Insurance is required.

911S-FtCaliperPiston,48x34_04_800x600.jpg	911SBrakePiston,Ft,48x34_CrossSection_800x600.jpg
OEMvs908vs911S-FtCaliperPiston,48x34_04_800x600.jpg	PET_911_65-69_Fig6-02-05_DiskBrake,Ft_800x600.jpg

Also available:

911R Ft Caliper Carrier, 901.351.410.03	911 Rear Caliper Spacer, Vented, ‘64-68, 901.352.969.10	930 Ft Brake Hat, Floating 930.351.457.01
911R_CaliperCarrier,3.5in,Ft+Bk_03_800x600x72.jpg	911RrBrakeCaliperVentedSpacerKit_06_800x600.jpg	930FtBrakeHats_09_800x600.jpg

[SN930]

Hi Jimmy,

I am interested in the FT brake hat kit, do you have a picture on this kit installed on a car?

Thanks Shane

Turbo brakes.png

[JimmyT]

SN930,

The 930 front rotor hats are identical to the OEM parts. The only 'tell' is that they are hard rather than standard anodized. Here are two images of these hats installed on cars.

930_FtBrakeHats_Installed_09.jpg

930_FtBrakeHats_Installed_05.jpg

You can visit FS: 930 Floating Front Brake Hat Kit (930.351.457.01, 930.351.423.00) for more photographs and information.

[SN930]

Amazing work!!! Thanks Jimmy, I would like to order a set please.