Results 1 to 4 of 4

Thread: Part# for door glass frame screws

  1. #1

    Part# for door glass frame screws

    Hello,

    Do you know the part # of the 2 screws located on top of 'pillar' of the door glass frame of a '70 911 T by any chance?
    Can't find it on the PET Katalog nor on any of the usual suppliers websites.
    Appreciate your help,

    Thanks.
    Olivier

    Name:  Early 911 Registry pic.jpg
Views: 162
Size:  92.1 KB

  2. #2
    Senior Member
    Join Date
    Jul 2006
    Location
    Corvallis, OR
    Posts
    2,564
    I could never find the part numbers for those. The door latch screws I believe are very close to the same. I found them and specialty hardware store. They weren't quite as large as the originals but very close.
    72S, 72T now ST

  3. #3
    Senior Member Scott A's Avatar
    Join Date
    May 2014
    Location
    South East USA
    Posts
    907
    I measured the head on my latch screw #28 and these on the aluminum frame in the photo. and they were the same, and they look the same.
    but the thread length is half that of the latches...the latches are about 10mm and the top top screw is less than 5mm.

    i you bought #28, you would have to make them shorter.

    Name:  screw3.jpg
Views: 173
Size:  60.7 KB

    Name:  screw1.jpg
Views: 160
Size:  72.1 KB

    Name:  screw2.jpg
Views: 134
Size:  83.0 KB

    Current long term ownership: 63 Cab, 71 911, 74 914

  4. #4
    Thanks both for your inputs on this!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.