Results 1 to 10 of 18

Thread: 380 mm leather wrapped steering wheel

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Senior Member
    Join Date
    May 2012
    Location
    UK
    Posts
    2,776
    A google search took me to 914 world where I read the following “The USA Porsche-Audi HO Recall campaign, which was issued after all 914s were made, indicates that it applied to 'approximately 83,000' 914s. On that, I think it’s reasonable to believe that ~83,000 914s made it to the USA, including all 4s and 6s.”

    While I don’t know I’ve little reason to doubt that figure as poster seems very knowledgable on the 914 model. P+A is USA (NA?) I suppose ?
    This website gives a breakdown beyond just USA
    http://914evolutech.free.fr/SITE/pag...production.htm

    Acknowledgments to the websites and their posters — trust it is ok to reference them here ?

    While the Carrera RS Model was never officially sold in USA when new in model year 73 a number of examples have made their way across the pond over the years and perhaps with some lost their original wheel when owners fitters an aftermarket one — however the 83000 for NA or nearly 120000 examples worldwide is a heck of a lot of steering wheels that could be kicking around! Maybe that scale gives pause when the topic of orphan steering wheels of 380mm size? Relatively few would be 806.10 of which the 914/6 may have been the donor.

    In 2020 I purchased a genuine 914/6 wheel for $200 from a well known member here — that price plus $85 insured shipping from USA to UK. It is rough compared to my lovely patinated but otherwise perfect original RS wheel; crucially it is stamped 806.10 with the same date and other markings match. Not a real RS wheel as it wasn’t ever on a 73 RS afaik but is a from 914/6 according to the very knowledgable seller. Handy to keep as a spare core that can be recovered if I ever felt the need to safely stow the cars original one due its rare very fragile plastic RS horn push and the lovely original leather with a grain and finish that’s hard for even the best recoverers to reproduce.

    Maybe if I recover it then bolt it to the RS even for ten mins I could genuinely say it’s been removed from an real RS and ask nearly 10x

    Steve
    Last edited by 911MRP; 10-08-2023 at 03:34 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.