targa soft window fitment

[JFP58]

Is there a correct factory fitment of the softwindow where it meets the base of the Targa bar? I’ve seen it go under the stainless cover but I’ve also seen it tucked under the small chrome strip at the base of the Targa bar. Thanks!

[jim amato]

John I have two softies, Neither is tucked under the chrome strip, I will see if I can find a pic, Might check the resource section at 912 bbs and look at the Targa supplement provided in owners manual packet

[JFP58]

Thanks Jim. I checked the Targa supplement in the 912 forum and it does have a closeup shot of the softtop to bar fit. Unfortunately, the photo is probably taken from a prototype and may not represent the production setup.

[jim amato]

John I stand corrected GOOD WORK!

[JFP58]

Thanks Jim.