Results 1 to 5 of 5

Thread: Matching paints question

  1. #1

    Matching paints question

    I'm looking to replace the decklid on my car (since one of the prior owners put on a lid taken from an earlier car). I have a corrct lid that I need to have cleaned up and painted.

    Paint job on my car is nice and relatively new. Prior owner had the paint done at a shop in So Cal that's now out of business.

    Any suggestions as to a place in or around LA that's most likely to match the paint properly the first time around?

    Original paint code is 63-6805-L. I know the repaint was done to match the original paint (i.e., Bahama Yellow), but I don't know the brand of paint used in the respray (and since the shop is out of business, I can't find out). The prior owner believes it was Glasso (?) or Glasurit (?).

    Any thoughts would be appreciated.

  2. #2
    Senior Member
    Join Date
    Oct 2008
    Location
    Burford, ON, Canada
    Posts
    4,239
    The L in the paint code says the factory paint was Lesonal. Glasurit is a possibility for the repaint. The trick is to find a shop that can color-match what you have on the car now. That may require some experimentation.

    I'd be interested in knowing the VIN of your car, to go with that paint code. Is it possible to post a photo of the badge with the code clearly seen. I need to be able to confirm the 63 part of the code for my research. I know 68 exists, and sometimes it is hard to tell when they don't stamp the characters properly. So the 63 is something I want proof-positive documentation on. Many thanks.
    Dave
    Porsche Historian, contact for Kardex & CoA-type Reports
    Addicted since 1975, ESR mbr# 2200 to 2024 03
    Researching Paint codes and Engine Build numbers

  3. #3
    Here's a picture of the badge with the paint code.
    Attached Images Attached Images  

  4. #4
    This picture was from before the respray (I think, since picture shows imprefections in the paint that are gone). Prior owner gave me the pic.

  5. #5
    Senior Member
    Join Date
    Oct 2008
    Location
    Burford, ON, Canada
    Posts
    4,239
    Well, I'd say that it shows the 63 definitively. Thanks.
    Porsche Historian, contact for Kardex & CoA-type Reports
    Addicted since 1975, ESR mbr# 2200 to 2024 03
    Researching Paint codes and Engine Build numbers

Similar Threads

  1. 69S value and matching enginer number question
    By tbahr in forum General Info
    Replies: 12
    Last Post: 01-25-2017, 11:39 AM
  2. Question about Non-Matching #'s Values
    By cowlescc in forum General Info
    Replies: 42
    Last Post: 01-11-2017, 08:29 AM
  3. Replies: 17
    Last Post: 03-12-2011, 09:57 PM
  4. Matching #'s question
    By jlandreth in forum Technical Info
    Replies: 4
    Last Post: 08-15-2009, 11:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.