WTB: 46mm Webers

[9146racing]

i am looking for a set of 46mm Weber carbs. they are urgently needed for a 914-6 GT restoration i am getting ready for. have manifolds!
please PM me
Hans

[Tijnes]

If 46mm PMO's 'll do. Not affiliated

http://forums.pelicanparts.com/porsc...n-request.html

[911r67]

can offer you very good 46 webers for 4500€

[sithot]

PMO's are somewhat easier to set up and won't be worn out requiring an immediate re-build. If you do have to re-build used Webers I suggest Paul Abbott:

http://www.performanceoriented.com

Good luck.

Tom

[plumber]

can offer you very good 46 webers for 4500€

$5800us dollars?

[sithot]

Here is your BEST alternative.

We offer technical support to any individual or dealer who buys PMO carburetors. Careful reading and following instructions eliminate most problems before they arise. Obviously, the engine and ignition system must be in good condition. Some engines, especially race engines, need additional tweaking of the carburetor jetting.

The bottom line is we want every installation to be successful, and we are willing to go the extra mile to make it happen. If you need to talk to us, fax your configuration, questions and phone number to 310-394-6313 and let us know a good time to call.

Regards,

Richard Parr

[9146racing]

can't do PMO, they are for the real deal.
thanks, Hans

[sithot]

Then prepare to have your bank account scuttled. $5,000 for the carbs and $2,000 for a rebuild (thereabouts).

Good luck.

[9146racing]

can't cut corners, i need the real deal.
WTB 46 Webers, got manifolds etc.

[kenikh]

Hans is likely doing this for a customer car - not his choice and not his bank account.