Which vendor has the best inventory of parts for my 901. Not sure what I'll need yet until we open it.
Which vendor has the best inventory of parts for my 901. Not sure what I'll need yet until we open it.
dr. evil on 914 world, knows these boxes inside and out and a good source for parts, also a great guy.
Bob, you can divide parts needs into new or used, as most vendors don't provide both.Originally Posted by Bob Harriman
Replacement items such as bearings, synchros, gasket sets are not hard to source, most well-known parts providers stock these. Original German parts are still available, although expensive. Some vendors are less candid about their parts, so I deal with those who provide more information- manufacturer, country of origin, etc.
Used parts such as gears, shafts, shift items are plentiful, and in some cases your only choice. Since condition of used parts is a primary concern, I'd avoid eBay and unknown forum advertisers. Deal with someone well-known and knowledgable about transmission parts.
If this transmission is from your '69 912, be aware there was a significant change during that model year, so you'll need to identify which version you have. Some parts differed between versions.
Jon B.
Vista, CA
Educate me please. I was unaware of that. It is a 5 speed
From the 911 Workshop Manual, page SR 139:
"Effective from 30 November, 1968, cars of types 912, 911T, 911E and 911S (not Sportomatics) are fitted as standard with a pressure cast gearbox housing."
"Introduction of this pressure cast gearbox housing, together with other modifications to the gearbox and transaxle, have lead to the establishment of new gearbox type numbers."
Early '69 transmissions had aluminum alloy housings; later '69 transmissions had magnesium alloy housings.
Some internal parts were changed as a consequence.
Jon B.
Vista, CA
From aluminum alloy early to magnesium alloy? Thanks. I will use my tranny # when ordering parts. cog'scog looks like a good parts source?
Bob, before you buy it might pay to google Joe Cogbill. Not everyone has had positive experiences with Cog's cogs.
andy
67S in pieces
EarlyS: 1358
[SIGPIC][/SIGPIC]
California Motorsports is near my other home in Lake Havasu City, AZ. I hear that they are very reputable.
Never had a need for transmission service,this guy has been around a long time & have heard good things concerning his services http://www.carquip.com
Bob
If you need any used parts, you may want to try a well established, Dismantler, experienced in the inner workings of Porsche transmissions.
Regards
Jim
Last edited by Jim Breazeale; 11-12-2013 at 08:22 AM.
Posting Permissions
Reply With Quote