Paint Code Decals

[davep]

Great info, we are finally getting somewhere with this decal. It is important to note that the characters are stamped, and thus show on the backside. The uniformity of the impression suggests that the stamping is done with a machine.

[timgt3]

Thanks Dave.
Vin is 9110301123

If you have any info on it would be much appreciated.

Build is on the forum as we'll
Cheers

[mfitton]

Ok, these are going out to Cam today, his 1313-G and Tim's 8080-H. Remember these are not the thick 3 mil aluminum nor are they embossed with the paint code. These are thinner aluminum polyester decal material with the aluminum showing through for the paint code, they are as close to correct type font that we can find and are to the size mentioned in an earlier post 37mm wide by 30.2mm. If you wanted 3 mil aluminum they would have to be silk screened and minimum of 50 qty. made at $4.75 each then use a hand stamper to put the paint code on (they cost $600) unless you know someone that has one.

100_1167.jpg
Hand-Held-Stamping-Set-46593-ba.jpg

[nickb4]

Mike,
PM sent on the aluminum polyester decals.

Maybe we can start a count here to see if we can get to 50 of the 3mil versions.
I would be in for two of the 3mil versions unstamped.
Thanks.

[Carl Bauer]

Ok, these are going out to Cam today, his 1313-G and Tim's 8080-H. Remember these are not the thick 3 mil aluminum nor are they embossed with the paint code. These are thinner aluminum polyester decal material with the aluminum showing through for the paint code, they are as close to correct type font that we can find and are to the size mentioned in an earlier post 37mm wide by 30.2mm. If you wanted 3 mil aluminum they would have to be silk screened and minimum of 50 qty. made at $4.75 each then use a hand stamper to put the paint code on (they cost $600) unless you know someone that has one.

Very nice Mike!

[BrentF]

Nice first try! I'd provide you with the dimensions on my decal, but won't be able to do so for a week.

Okay, I got around to measuring my factory paint code decal pictured below. The outside dimensions of the decal are 37mm by 30mm.

[CamBiscuit]

Brilliant work Mike thank you!

[timgt3]

Thanks Mike. Cam is going to fix you up for both our sets and I will sort him out. They look fantastic.

[Schiefer]

Hi Mike,
Will you continue to offer these?? I have a friend with a car missing the sticker.

Radmund

[mfitton]

Hi Mike,
Will you continue to offer these?? I have a friend with a car missing the sticker.

Radmund

Let me know what you need. Anyone get theirs yet?