Photo request - backside of dash / wiring / etc

[Cornpanzer]

How do you eat an elephant ...?

Making some progress on my wiring harness, but my memory at 3.5 years since disassembly is not as good as I hoped, and my sketches are not too great. (Rookie mistake, I know)

Does anyone have a 69 through 71 partially disassembled that can take good photos of where the wiring lays and all the components are hooked up? Or anyone willing to remove the cover and take some good quality photos for me?

Thanks for any assistance!

[RSTarga]

Do these help?

[Cornpanzer]

Very helpful! Thanks. It appears that I have a couple extra small holes on the drivers side near where the two relays snap into the bulkhead. Any ideas what those are for?

Also, there is a large hole just above the ignition switch. What goes in there?

Thanks for the great pics. More close-ups would be fantastic. I owe you a beer or three!

[edmayo]

The large hole above the switch is for the bowden cables. The extra small holes get plastic plugs like the bumper guards.

[Cornpanzer]

Ahhh, of course! Thanks Ed. I need a new plug for those HVAC cables, and have scoured my parts book but cant come up with a part number. Any ideas?

Thanks
DC

[moito]

here we go

have two 70 cars in the shop one is karmann one reutter built the pattern in this area is different .

one hole is pluged with a rubber cap

[Cornpanzer]

Killer! Thanks

[edmayo]

David, bowden grommet is 914 571 151 10 also used on 914.

[edmayo]

Here's one I did recently,,,,any help?

[Cornpanzer]

David, bowden grommet is 914 571 151 10 also used on 914.

Beautiful, now I OU a beer too.