The one that inspired this thread --- from 9112200772 . . . ex Lance Reventlow . . .
https://www.early911sregistry.org/fo...=1#post1065235
......................
The one that inspired this thread --- from 9112200772 . . . ex Lance Reventlow . . .
https://www.early911sregistry.org/fo...=1#post1065235
......................
.. April U.S. '73
Chuck Miller
Creative Advisor/Message Board Moderator - Early 911S Registry #109
R Gruppe #88
TYP901 #62
'73S cpe #1099 - Matched # 2.7/9.5 RS spec rebuild
'67 Malibu 327 spt cpe - Period 350 Rebuild
98 Chevy S-10 Utility
15 GTI Commuter
Here's mine --- '70 . . .
https://www.early911sregistry.org/fo...l=1#post496623
......................
1969 Karmann Coupe. Note precision surgery performed on rear wall and extra holes on lip from dealer installed air conditioning.
. . . Bert's old car . . .
https://www.early911sregistry.org/fo...l=1#post992119
.
'72 T w/factory A/C, only partially re-installed (no hoses yet).
![]()
- Arne
Current - 2018 718 Cayman, Rhodium Silver, PDK
Sold - 1972 911T coupe, Silver Metallic; 1984 911 Carrera coupe, Chiffon white; 1973 914 2.0, Saturn Yellow; 1984 944, Silver Metallic
. . . note the contact cement on the side of the trunk
https://www.early911sregistry.org/fo...l=1#post816833
…………….
Last edited by LongRanger; 07-27-2020 at 10:55 AM.
july 65,
brake system now changed for dual circuit and DOT 5.1 silicone brake fluid, reservoir now in the box
vented and drilled discs and larger diameter for brake calipers.
The Porsche factory brake bias of 1,596 was kept, front is now 48mm, rear is now 38mm
In order to keep the steelies, 10mm spacers had been used for front and rear. otherwise a swap to Fuchs or @group4wheels would have been necessary.
59 750 pre unit triton
63 650 gray silver bikinitub triumph thunderbird
70 650 astralred silver triumph bonneville
65 912 slate gray "erwin"
73 914 ravennagreen "ferdl", swapped 1:1 for a
10 997 racing green awd gustl
erwin_loves_polo
October 65. Unrestored and Blower still works.
Alex in Virginia
Looking for:
ward to driving my car!
Early 911S Registry # 2863
under construction.... 1968 911L Targa.. would the drain pipe at the floor be welded? or is it sealed with butel? i think butel.... i also need to weld the hole that the later cars would have used....![]()