Who makes the skid plates for the 85L plastic gas tanks? Is there a Porsche part number? I can't seem to find it. Thanks, -Scott
Who makes the skid plates for the 85L plastic gas tanks? Is there a Porsche part number? I can't seem to find it. Thanks, -Scott
72S, 72 3.5L Signal Green, 914-6 GT Signal Green
I believe there is someone else here doing them now.
I used to make exact replicates years ago copied from originals, both versions in steel and aluminum.
For the 85L the original aluminum plate works best as it sat about 3/8” lower than the earlier steel plate but I would still add an additional 1/2” spacer block under rear brackets to help clearance the additional depth of the plastic tank.
A regular factory steel plate will otherwise not fit.
[SIGPIC][/SIGPIC]Robert D. Groß
I think you need to make them again! I'd do aluminum as the steel ones are very heavy.
72S, 72 3.5L Signal Green, 914-6 GT Signal Green
Scott...I've got this sitting in my garage collecting dust that I don't believe I'll have a project for.
It's yours if you want it??
Knowing you, you'll have to polish it or re-finish it in some way. Haha
Never been used or mounted as far as I know...it's in great condition, not bent or mangled or scraped up.
Aluminum baby....
-Doug
2022 Carrera 4S Oslo Blue
1989 Lancia Delta Integrale 16V
1973.5 911T
Steel. A couple inches to the passenger side the fuel pump would be toast. A couple inches to the drivers side the master cylinder would be toast. I’m going to have a plate that goes from the front to the bolts to the rear of the master cylinder and fuel pump. A dump truck dropped a chunk of concrete in front of the car and I had cars all around me and nowhere to go.
1959 Auratium Green 356A Super w/ Rudge wheels
1970 Irish Green 914-6 w/2.2S
Current -1967 Bahama Yellow 912 POLO 2cam4 #1
www.reSeeWorks.com
Personalized Vintage Porsche's and parts
I couldn't find the sports car of my dreams, so I built it myself-Ferdinand Porsche
Zuffenhaus Products made the best plastic tank front skid plate. No spacers needed as it was made for plastic tank. They don’t advertise in the ESSES any more so I don’t know if they are still around. Here is one on my car.
Heck yeah Doug! I'll take it. Thank you. I just sent you a text.Originally Posted by skinnerd
Scott...I've got this sitting in my garage collecting dust that I don't believe I'll have a project for.
It's yours if you want it??
Knowing you, you'll have to polish it or re-finish it in some way. Haha
Never been used or mounted as far as I know...it's in great condition, not bent or mangled or scraped up.
Aluminum baby....
72S, 72 3.5L Signal Green, 914-6 GT Signal Green
Very nice. I want one that goes all the way to the front one piece.
1959 Auratium Green 356A Super w/ Rudge wheels
1970 Irish Green 914-6 w/2.2S
Current -1967 Bahama Yellow 912 POLO 2cam4 #1
www.reSeeWorks.com
Personalized Vintage Porsche's and parts
I couldn't find the sports car of my dreams, so I built it myself-Ferdinand Porsche
Rick the bottom of your car is automotive jewelry!
Joe Annicelli
Early 911S Registry #751
Polo Red/Black 1967 Porsche 911S Coupe "Walter"
Black/Red 1967 Alfa GTJr. Coupe "Nero"
Italian Red 1994 Ducati 900SS/SP looks fast standing still
Italian Red 1957 Gilera 150 Sport
Ahhhh the sixties... I envision myself one early Saturday morning wearing plaid shorts, black shoes with white socks smoking a cigarette heading to the hardware store to buy a bag of nails.
SWB cars are an acquired taste however once acquired theirs no turning back.
Thanks Joe, it is now raining here pretty good to wash all the winter salt off the road. Then I can take it out for a ride.
Posting Permissions
Reply With Quote