Driving / Fog Light Wiring

[Cal]

I recently installed driving and fog lights on my '68 911 and need to wire them up. Does the stock wiring harness from the factory have accommodations for connecting the upper or lower set of lights?

[70SATMan]

The lower set. To wire the TTG lights requires an additional harness.

[Cal]

The lower set. To wire the TTG lights requires an additional harness.

Thanks. Dumb question….is there a thread that shows where the factory wires are located for connecting the lower set?

[ecostellodo]

The green/white wires should be taped and located on the J-tube underneath the car where your horn wires are under the headlight bucket (not in the bucket). Mine were cut close to the horn wires.

The wires are there regardless if your car came with fogs or not. The factory used the same harness for the 911/912.

[Cal]

The green/white wires should be taped and located on the J-tube underneath the car where your horn wires are under the headlight bucket (not in the bucket). Mine were cut close to the horn wires.

The wires are there regardless if your car came with fogs or not. The factory used the same harness for the 911/912.

Great, thanks.

[RSTarga]

Nice, are those Erik's?

[ecostellodo]

And as @70satman said you will also need a wiring loom to control the fog lights.

https://www.912bbs.org/forum/threads...rminate.54640/

[RSTarga]

https://911bestinclass.com/collectio...wiring-harness

[Cal]

Nice, are those Erik's?

Thanks….yes, they’re Eric’s.