Hi everyone,

I bought a NOS RSR High Butterfly Stacks here a couple of years ago and I was dry-fitting it today with the MFI fuel pump and the (hard) fuel lines.
I think I figured out where what goes, but it looks like I'm missing the throttle linkage (rod?) between the connecting rod and the Bosh MFI injection pump as per pictures below.

This is what the set is supposed to contain:
Name: DSCN3384 - Copy.JPG Views: 237 Size: 122.4 KB

And this is what I have (ie: the two short ones for left and right I have, the long one on the left for front to back of the HB stacks, but the 'middle length' one (to connect to the MFI Pump I assume) is missing.
Name: IMG_8477 - Copy.jpg Views: 232 Size: 113.3 KB

Pelican parts has the ball sockets individually and a throttle body push rod (901.110.1063.00) so I could make one, but I don't know if it is what I need.

Does anyway have a diagram for the RSR HB stacks (I don't think it even exists but one can ask....) or is there someone here that knows the part number for this piece?
I can always measure it again and gamble on the pelican parts item, but just in case anyone knows and I can do it right...