WTB: return spring for SWB vent window latch

[Eminence Gris]

Plater lost this tiny spring.

On PET it's 644.542.555.00

In PET diagram, it's #10.

I'm sure there is a third party option to replace this spring, which is unavailable from Porsche... or can buy the part used if you have an otherwise unusable release lever.

[Cliff]

Have you tried Ace Hardware. Nuts , bolts , washers, springs , very extensive selection.

[moito]

here is what i have to let go

[Eminence Gris]

Thank you, moito. I have all the rest, and just had it plated.

Any chance you could measure the spring and report the dimensions? ID, OD. Length...?

[moito]

Thank you, moito. I have all the rest, and just had it plated.

Any chance you could measure the spring and report the dimensions? ID, OD. Length...?

can do tomorrow

[moito]

L=15mm
L compressed=10mm
OD=3,5mm
ID=2,4mm
wire=0,55
coil=counterclockwise
ends on early ones are squared later ones are ground


and i found an orphan today....that i would give away for free + actual shipping costs

[Eminence Gris]

L=15mm
L compressed=10mm
OD=3,5mm
ID=2,4mm
wire=0,55
coil=counterclockwise
ends on early ones are squared later ones are ground


and i found an orphan today....that i would give away for free + actual shipping costs

moito, Got it! Thank you so much! Let me know if I can do anything for you.