While everything is apart continued...

For those of you following my saga, I am up to replacing all of the fuel lines on my 73.5T. The supply line leaving the tunnel is 9mm. I can't find a source that has high pressure line that large. The largest Pelican has is 8mm and they told me I could use that and force it on. I would like to use the right size unless it just doesn't exist.

Does any one have a good source for metric hp fuel lines besides them?

At some point in the car's history it stopped running and would not start. It was traced to the fuel pump which was then moved to the front of the car. I am not sure why. The replacement line I pulled off was 3/8 sae (blasphemy!) and it ran into a threaded reducing fitting that went into the original line with the swaged fitting. Got all that? Me neither. I am amazed that it did not leak with all of the connections/contortions. I am also amazed at the condition of all of the lines period, and the fact that they did not leak. So far that is the only thing I have found that is bastardized. I am sure there is more. At least I am putting things back together.

If you haven't checked your lines lately, it is probably not a bad idea.

Thanks,

Steve