Hello,


For those of you that know me, I have been trying to sell my well developed 2.0 SCCA E Production legal race engine. This engine propelled me (and the car) to 2nd place at the 2005 SCCA Runoffs at Mid Ohio. Well, I have been unable to sell it as a lump, so I have decided to part it out, please Pm this board for the items you are requesting. I am out for a business trip this week and early next, but will start shipping items when I return, but answering pm's each night. Thanks!

Counterweighted “S” crank, race prepped #2&5 crossdrilled
Pauter machine connecting rods 1500.00


Aluminum straight cut intermediate shaft gears, (yes it sounds like a blower)
Cam chain intermediate drive gears REM isotropic finish 600.00


911 T case with internal airflow work, and polishing, boatailed cases, and cylinder cut outs
Oil passages and connections blended and matched
Blue printed oil pump, with bypass modification 300.00


Birel cylinders bored to 81mm using torque plate mounted to cases
Escuchie Pistons, high compression 13.3:1 750.00


Cylinder heads CNC ported and hand finished with stainless valves and AASE springs, This work performed by Circle Performance in Massachusetts, This is my 8th iteration of this configuration, with many hours spent in cylinder head development, these have less than 7 hours on them and are in very good condition, would make an excellent set of FIA heads With spare ported head and valves 2250.00

Elgin Camshaft 314/296 degrees and .518 lift with matched rockers 400.00

Cam drive gears REM finished 75.00

Stomski mechanical tensioners 50.00

Manifolds match ported for 40mm webers 250.00 (should sell with heads)

Early engine shroud
Alternator gutted with spindle installed 150.00

Thermostat block off hardware installed 100.00
-16 AN oil inlet mounted in Aircooled racing oil cooler block off plate
-12 An outlet installed

Race prepped Weber carburetors (No manifolds) 1500.00
These have modified shafts, tall secondary venturis, bowl modifications, 38mm primary venturis, PMO -6AN fuel fittings, ITG filters, linkage and a compete jetting kit with several sets of jets and carburetor parts. Buyer will get the pressure regulator and the AN lines for the carburetors. I mount this just above the engine shelf in front of the fan, so the fuel stays cool. These carbs have well over 40 hours of work into them.

Electromotive Single plug crank fire system with pulley, dist plug, coil pack, and wires (HPV1) 550.00

Complete 914-6 header system. Many hours of testing were spent to develop this system for racing. 1 1/2-1 5/8(mild Steel) 6 into 2 (stainless) into one with three collectors and a spintech muffler. You may soon see this system for sale as it has proven to be a leading race system. originally designed by Bob Burns before he passed away. 1350.00

Spare 911t Case and rods,

2.0 T heads ready for port work 250.00

Misc 911 engine hardware, gaskets etc 100.00

7R case with minor flaw at rear main seal (does not leak), 200.00

All prices are FOB Massachusetts

Please contact Erik Madsen @ 508 524-3145 or soccerrace@aol.com Pics upon request.

Thanks for looking