The plastic evap tank tucked inside the left front fender on my 71T is cracking. Anyone have one? I guess the gas vapors make them brittle. Not sure if they're available new.
Thanks
John
The plastic evap tank tucked inside the left front fender on my 71T is cracking. Anyone have one? I guess the gas vapors make them brittle. Not sure if they're available new.
Thanks
John
John Schiavone
Connecticut
356 Cab, 66 911, 914-6, 550-Beck, 981 Cayman, 54 MV Agusta Dustbid
Hi John,
In case it helps you can still buy them new from Porsche, but for what they are they are very expensive.
HTH
Alan
Thanks Alan. Do you have a part number? I can't find it in the PET manual or through Stoddards or Pelican.
John
John Schiavone
Connecticut
356 Cab, 66 911, 914-6, 550-Beck, 981 Cayman, 54 MV Agusta Dustbid
John,
I have one - out in one of the boxes in my shed. Remember it being in good shape, but haven't looked at it in a couple of years. I can check this weekend for you.
Sam
You can retrofit a later tank unless you need the points for concurs.
My story here: http://forums.pelicanparts.com/porsc...placement.html
and more details here: http://forums.pelicanparts.com/porsc...1965-73-a.html
Harry
Member #789
1970 VW Sunroof Kombi Bus - "The Magic Bus"
1971 Jaguar XKE 2+2 V12 Coupe - {insert name here}
1973.5 911T Targa for fun - "Smokey"
2009 MB C300
John
Is this the one you need or is it the smaller rectangular unit?
Tom Butler
1973 RSR Clone
1970 911E
914-6 GT Clone in Progress
I need one too...unfortunately I never had one so am not sure which one I need exactly either. I thought they were NLA from Porsche.
Here you go...
Part # 47 in the diagram
P/N 901-201-062-22
PM me for pricing if interested
Tom Butler
1973 RSR Clone
1970 911E
914-6 GT Clone in Progress
Thanks Tom, but that's not it. PET manual does not show tank I need -- it is mounted inside right front wheelwell ahead of tire. The one you show goes behind the instrument cluster.
John Schiavone
Connecticut
356 Cab, 66 911, 914-6, 550-Beck, 981 Cayman, 54 MV Agusta Dustbid
John,
Sorry for the delay - PM sent.
Sam