Clutch and Flywheel for a 70/71 911 Gearbox

[Rob B]

I am trying to ascertain if I can use the flywheel and clutch currently on the car with a 915 gearbox if I change back to a 70/71 911 gearbox.
Or am I going to have to buy a clutch and flywheel that is specific to these gearboxes, in which case it would then make no difference if I used an earlier 901 box as I would still have to replace the clutch and flywheel.

Rob

[Mr9146]

You can use the pressure plate and flywheel. You will need to change the disc and T/O bearing.

[Rob B]

Marco

Thanks - that is exactly the info I was looking for.

Rob

[petro206]

Hi Rob B,
Did you change your gearbox?
I've a 2.2 T with 915 transmission and i bought a 911/01 with pressure plate and flywheel.
I need the clutch plate, but i don't disassembly the transmission yet.
Which are the differents between clutch plate 915 vs 911 ?
Why can't i use the 915 clutch on 911/01?

Thank you

[Richy]

The input shaft is bigger in diameter on the 915 .