WTB: A/C vent

[merbesfield]

WTB Behr under dash A/C for 72/73 911. I actually only Ned one of the thin vents from the unit but will buy what you have to get the part I need if reasonable. Thanks for the help. Photo borrowed from post on bird. Thanks

[merbesfield]

Sorry posted in wrong forum. Can mod pls move. Thx

[merbesfield]

I am still in need of this vent. Just one little vent please if anyone has one? Thanks

[gearjam]

I have three I bought 25 years ago but must check if I need them first.

[merbesfield]

I have three I bought 25 years ago but must check if I need them first.

This would really help me out. I greatly appreciate the effort. Thanks, Mark

[Jim Breazeale]

Mark

If you still need a vent, I just got some.

Regards

Jim

[merbesfield]

Mark

If you still need a vent, I just got some.

Regards

Jim

Jim, as always thanks for the great service. Parts arrived in perfect with two little extra knobs. Thanks for following through with your service. Can anyone give me a tip on how these go in without breaking anything?. Thanks, Mark

[orange911]

It's pretty straight forward from what I remember. I believe you need to remove the bank of three vents and replace bad parts, then reassemble as a bank of 3 as I remember them to be interconnected. I think I pulled the center of the the 3 first and squeezed it out, and the others followed easily. There were no tight stings or hidden pitfalls. Good luck. BTW, you can rebuild a broken vent with pieces from another. I had 2 bad ones and enough parts to make a good one from the 2. Its the horizontal pieces that you need.

[merbesfield]

Thanks, now all I need is some time. Anyone selling any

[rpc356]

Can anyone give me a tip on how these go in without breaking anything?. Thanks, Mark

Mark, I recently disassembled, repaired, and reassembled that under dash unit on my 73. Let me know if you need any photos and/or have specific questions, happy to help.

--Richard