Results 1 to 6 of 6

Thread: WTB: Front brake dust shields and mounting brackets for '67S

  1. 03-18-2013, 06:48 PM #1
    Silverbullit
    Silverbullit is offline
    Senior Member
    Join Date
    Nov 2006
    Location
    S. F. Bay Area
    Posts
    1,278

    WTB: Front brake dust shields and mounting brackets for '67S

    Bought car in pieces, these are missing. Brian bcferrin@yahoo.com
    Brian
    S Reg #1032

    "I measured twice, cut three times, and it's still too short!"
    Reply With Quote Reply With Quote
  2. 03-20-2013, 08:45 AM #2
    Silverbullit
    Silverbullit is offline
    Senior Member
    Join Date
    Nov 2006
    Location
    S. F. Bay Area
    Posts
    1,278
    I'd even appreciate a photo of the above so I can shop for the correct pieces I need. Thanks
    Brian
    S Reg #1032

    "I measured twice, cut three times, and it's still too short!"
    Reply With Quote Reply With Quote
  3. 04-07-2013, 01:14 PM #3
    Schiefer
    Schiefer is offline
    Pay to play Schiefer's Avatar
    Join Date
    Jun 2008
    Location
    Norway
    Posts
    1,276
    Bump!
    Happy to take pictures when my car is out of storage if that can be of any help.
    S-Reg #1382
    67S Lavender
    70S Silver, original Slate Gray Japan delivery
    Reply With Quote Reply With Quote
  4. 04-07-2013, 08:35 PM #4
    902/16
    902/16 is offline
    Junior Member
    Join Date
    Nov 2010
    Location
    Santa Rosa,Ca.
    Posts
    9
    I have both rear & front dust shields for SWB car.SWB BRAKE.jpg
    email me at efell097@gmail.com if you need them.
    Chuck
    Reply With Quote Reply With Quote
  5. 04-11-2013, 06:07 PM #5
    Silverbullit
    Silverbullit is offline
    Senior Member
    Join Date
    Nov 2006
    Location
    S. F. Bay Area
    Posts
    1,278
    Thanks for the photo. According to the parts book, the swb "S" has unique splash shields, and a unique bracket that attaches the front ones to the strut (caliper bracket). I've found everything (I hope) but the brackets. Any photos/leads, etc? Thanks
    Brian
    S Reg #1032

    "I measured twice, cut three times, and it's still too short!"
    Reply With Quote Reply With Quote
  6. 04-11-2013, 08:05 PM #6
    Bobs 67S
    Bobs 67S is offline
    Senior Member Bobs 67S's Avatar
    Join Date
    Oct 2002
    Posts
    1,355

    Caliper mounting plate

    The casting for the 911S caliper mount plate looks like this:

    The four holes around the axel mount the strut, the two centered on the "T" are the brake caliper mounts and the two outboard small holes are for the
    splash guard mount bolts.

    HTH
    Attached Images Attached Images
    Bob
    Early S Reg #370
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. FS: @eBay -Koni front strut housings w/ dust shields, powder coated & raised spindles
    By m1franck in forum For Sale: 911 Parts
    Replies: 7
    Last Post: 10-17-2013, 11:12 AM
  2. '67S-68S front brake splash shields
    By Silverbullit in forum Technical Info
    Replies: 7
    Last Post: 10-01-2013, 01:14 PM
  3. FS:@Pelican-Koni front strut housings w dust shields, powder coated & raised spindles
    By m1franck in forum For Sale: 911 Parts
    Replies: 0
    Last Post: 09-13-2013, 07:47 AM
  4. FS: Front Brake Rotor Dust Shields - Powder Coated
    By m1franck in forum For Sale: 911 Parts
    Replies: 5
    Last Post: 12-26-2010, 01:37 PM
  5. FS: Brake Shields Front and Rear
    By bob tilton in forum For Sale: 911 Parts
    Replies: 1
    Last Post: 05-12-2009, 05:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules


Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.