Does anyone happen to know off hand what the cam timing is supposed to be on a set of DC80s?
Thanks in advance. :)
Printable View
Does anyone happen to know off hand what the cam timing is supposed to be on a set of DC80s?
Thanks in advance. :)
Marco - from John Dougherty's website:
http://www.drcamshafts.com/911profiles.htm
Model = DC 80
Duration at 1mm = 283/265
Duraton at .050" = 276/258
Valve lift = .505"/.471"
Lobe seperation angle = 100
Lift @ overlap setting = 6.2 mm
The precise answer within 100 minutes on a holiday week.......... Is this a message board or WHAT !!!!!! ........ ;) :)
Holiday Cheers