SWB rear calipers for vented rotors

Anyone have a pair of Wide L rear calipers for SWB?

http://www.early911sregistry.org/for...nted-disc-type

Thanks for the tip! I will take contact with seller, but hope to get some less expensive (if possible..)

But these look fantastic!

Pretty rare items. Contact Eric Shea at PMB, he may have something...

Do you already have the special rotors for these?

John, I will take contact with Eric, thanks.

I do not have rotors, but have learned that SC rotors fit after some machining.

I believe that it is the 944 rotors that they are machining and there are some short comings to this conversion.

I mean early 944 rotors of course, thanks. They are maybe not 100% but will do as they will go on an 912/6 project and not a 67S. The right rotors are expensive but cheap considered value on the calipers btw.

Quote:

---

Originally Posted by 91167coupe

I mean early 944 rotors of course, thanks. They are maybe not 100% but will do as they will go on an 912/6 project and not a 67S. The right rotors are expensive but cheap considered value on the calipers btw.

---

Since you are car is not a "real" S and in case you want to save a few $$, you might want to look into alternative calipers w/ a 38 mm piston.

Richard

Quote:

---

Originally Posted by preS

Since you are car is not a "real" S and in case you want to save a few $$, you might want to look into alternative calipers w/ a 38 mm piston.

Richard

---

I am open for alternative calipers but haven't found other that fit. I have calipers (48mm?)for ventilated rotors for the front and will definetely consider anything that fit the rear SWB arms and for ventilated rotors.