Printable View
Looking for the B-Piller seat belt bolt (2). It's an odd size, 11mm x 1.25mm thread. 17mm hex ATF. The shoulder is 8.5mm in length and is 12.9mm O.D. Threaded portion is 20mm long. Overall length is 33mm. These are for a 72. Photo below. Need two bolts.
Attachment 359513
Attachment 359514
Mark
Call me tomorrow. I have hundreds of them
Regards
Jim
Thanks Jim, will do.
Hi,
It's not 11 mm but 7/16 UNF thread, not an odd size in the non-metric world:)
Cees
^ that.
:)
As are all seat belt bolts it is a UNF thread , but the shoulder and head thickness are a bit unusual.
Thanks for the information. Learning more each day on this site.
Hi Jim, I need the same bolts for my 68, are they all the same?Quote:
Originally Posted by Jim Breazeale
68s are much different. Give me a call tomorrow.
Regards
Jim