1969 912 reSee Works Build

Right rear quarter panel dive.

https://www.dropbox.com/s/27cyrd1tha...4360.JPG?raw=1

https://www.dropbox.com/s/kviz2ilvhl...4364.JPG?raw=1

https://www.dropbox.com/s/rvfj6ijo0h...4366.JPG?raw=1

https://www.dropbox.com/s/q9dfifw2xv...4376.JPG?raw=1

https://www.dropbox.com/s/s7f3vy5nsu...4380.JPG?raw=1

Lead work begins

https://www.dropbox.com/s/sf071ra7c1...4369.JPG?raw=1

https://www.dropbox.com/s/98xmqwh0t6...4370.JPG?raw=1

https://www.dropbox.com/s/xxly26zdmq...4384.JPG?raw=1

https://www.dropbox.com/s/h8mpf3x8tm...4388.JPG?raw=1

I just wonder whether Porsche sealings are so soft that they won't compromise the gaps.
On my BMW 1600 Convertible the doors were pretty good - well only if if you had no seals.
Once the rubber seals were mounted the doors had up to 4 mm at the lower end.

Quote:

---

Originally Posted by uai

I just wonder whether Porsche sealings are so soft that they won't compromise the gaps.
On my BMW 1600 Convertible the doors were pretty good - well only if if you had no seals.
Once the rubber seals were mounted the doors had up to 4 mm at the lower end.

---

thanks for following.The seals will zero impact on gapping dimensions.The seals do impact depending on quality and vendor, the panel transfer from bolt on panel to fixed body panel typically pushing out the weaker,ie the bolt on panel,door ,hood,engine lid etc.
Over time these seals will settle down with naturally heat from the sun,providing they are within a 'reasonable' tolerance to begin with.If not,you will have to shave the back of the seals.

file lead

https://www.dropbox.com/s/gqzhusmo7q...4390.JPG?raw=1

then add more lead

https://www.dropbox.com/s/i16k8jtsoh...4392.JPG?raw=1

https://www.dropbox.com/s/w8sqggwvwk...4397.JPG?raw=1

dialing in

https://www.dropbox.com/sh/kwnx3kq96...t56QZXba?raw=1

https://www.dropbox.com/s/3vldtud7mb...4403.JPG?raw=1

https://www.dropbox.com/s/aulbl8a7ah...4406.JPG?raw=1

https://www.dropbox.com/s/m76as9qcwd...4410.JPG?raw=1

https://www.dropbox.com/s/9ztm27nbvp...4411.JPG?raw=1

With wax and grease high lighter fluid

https://www.dropbox.com/s/0k1pvzx309...4415.JPG?raw=1

Right front fender panel dive

https://www.dropbox.com/s/ho17r56fkn...4628.JPG?raw=1

https://www.dropbox.com/s/mjw6c39tjy...4632.JPG?raw=1

https://www.dropbox.com/s/gtaib8xp2u...4650.JPG?raw=1

https://www.dropbox.com/s/lg0imb6zfr...4674.JPG?raw=1

https://www.dropbox.com/s/6vhpmifnoc...4675.JPG?raw=1

https://www.dropbox.com/s/9gdeu4ryaj...4678.JPG?raw=1

Lead work begins

https://www.dropbox.com/s/xlixnym1h0...4683.JPG?raw=1

I'm thinking this could be our next POLO project. Something a little different.

file and add more lead

https://www.dropbox.com/s/p2waj33ly4...4795.JPG?raw=1

https://www.dropbox.com/s/tt5niob2jp...4798.JPG?raw=1

https://www.dropbox.com/s/7a0mg8boyk...4797.JPG?raw=1

https://www.dropbox.com/s/e9be8bpqzi...4801.JPG?raw=1

https://www.dropbox.com/s/yy3b6s5qtp...4803.JPG?raw=1

https://www.dropbox.com/s/98uevzihzb...4804.JPG?raw=1

https://www.dropbox.com/s/xquko5fpat...4805.JPG?raw=1

https://www.dropbox.com/s/f1e5qokcyb...4809.JPG?raw=1

https://www.dropbox.com/s/3s60shxoaz...4810.JPG?raw=1

https://www.dropbox.com/s/aieylhhzwh...4813.JPG?raw=1

https://www.dropbox.com/s/yi3aloct6u...4816.JPG?raw=1