Printable View
Making the lower 20% air deflector on the left side,using patterns from the right.
https://www.dropbox.com/s/pxnox1606z...5613.JPG?raw=1
https://www.dropbox.com/s/1qpm5jdo16...5619.JPG?raw=1
https://www.dropbox.com/s/cc4x0pszko...5626.JPG?raw=1
https://www.dropbox.com/s/9g1v3dn874...5638.JPG?raw=1
https://www.dropbox.com/s/0kggkg8nws...5681.JPG?raw=1
https://www.dropbox.com/s/gtbjfbtwv5...5683.JPG?raw=1
https://www.dropbox.com/s/ciqip77nk9...5693.JPG?raw=1
Upper 40% left side air deflector build for the oil cooler.
https://www.dropbox.com/s/xdwruzn73a...5706.JPG?raw=1
https://www.dropbox.com/s/glyau9a9l6...5709.JPG?raw=1
Next project up on the reSee build is oil line air intake and exhaust cover panels to serve as protection and cosmetically pleasing to the eye.
Creativity begins to flow and we can draw on influences of projects we have had in the shop over time as well as the internet for research and ideas.
So below is a 1959 Porsche 718rsk spyder recently completed at our shop ,and this car was my first stop for idea influences for the 912 reSee build.
https://www.dropbox.com/s/wsvso1gcbn...6076.JPG?raw=1
https://www.dropbox.com/s/2m0btysjez...6163.JPG?raw=1
https://www.dropbox.com/s/87y21y1do5...6170.JPG?raw=1
https://www.dropbox.com/s/syitnus4ri...6100.JPG?raw=1
https://www.dropbox.com/s/6povlrgvvd...6087.JPG?raw=1
Air intake
https://www.dropbox.com/s/39n0hkmxac...6070.JPG?raw=1
https://www.dropbox.com/s/qjmlbdhpr1...6158.JPG?raw=1
Making a template cover piece panel
https://www.dropbox.com/s/gnyq061ue0...5742.JPG?raw=1
https://www.dropbox.com/s/oq85jphmmc...5743.JPG?raw=1
https://www.dropbox.com/s/6kj3pnuzcr...5746.JPG?raw=1
https://www.dropbox.com/s/tjeibzxnek...5749.JPG?raw=1
https://www.dropbox.com/s/j9nocg6k8w...5755.JPG?raw=1
https://www.dropbox.com/s/tn52gtxhjv...5759.JPG?raw=1
forming main lower body of oil line cover
https://www.dropbox.com/s/ee65ptn789...5815.JPG?raw=1
https://www.dropbox.com/s/7cn7brnebj...5818.JPG?raw=1
https://www.dropbox.com/s/e0gch24s45...5823.JPG?raw=1
making preliminary clearance for oil line under the jacking point and the jacking point itself.
https://www.dropbox.com/s/oe170otx56...5863.JPG?raw=1
https://www.dropbox.com/s/qtshyt2ida...5868.JPG?raw=1
https://www.dropbox.com/s/o3bsqllqpr...5870.JPG?raw=1
https://www.dropbox.com/s/o3tn70m57s...5879.JPG?raw=1
Now the horizontal panel main body is roughed ,we'll put that a side for moment and work on the adjoining oil cover vertical panel.
https://www.dropbox.com/s/erbfkc8clm...5880.JPG?raw=1
https://www.dropbox.com/s/8tgb9hf6tm...5881.JPG?raw=1
making the jig
https://www.dropbox.com/s/k8n0pfs82o...5885.JPG?raw=1
https://www.dropbox.com/s/9uragy2i0i...5887.JPG?raw=1
roughing in the panel
https://www.dropbox.com/s/22my0okp3l...5893.JPG?raw=1
https://www.dropbox.com/s/wvvvkqrcc3...5895.JPG?raw=1
adding more definition
https://www.dropbox.com/s/l8h4w6qz6y...5900.JPG?raw=1
https://www.dropbox.com/s/d2c2pu01mo...5913.JPG?raw=1
https://www.dropbox.com/s/sqwaih1msd...5914.JPG?raw=1
https://www.dropbox.com/s/105lskd8qd...5925.JPG?raw=1
https://www.dropbox.com/s/7ictrvz6yb...5932.JPG?raw=1
https://www.dropbox.com/s/g0056bfmv2...5934.JPG?raw=1
https://www.dropbox.com/s/e7zfwxvz7g...5936.JPG?raw=1
Fascinating to watch the skills here....
http://forums.pelicanparts.com/uploa...1535945667.JPG
http://forums.pelicanparts.com/uploa...1535945667.JPG
http://forums.pelicanparts.com/uploa...1535945667.JPG
http://forums.pelicanparts.com/uploa...1535945667.JPG
http://forums.pelicanparts.com/uploa...1535945667.JPG
http://forums.pelicanparts.com/uploa...1535945667.JPG