Should be in the garage tomorrow. A stalled, mild restomod project. 1964 Chevrolet C-10 short bed step side. Should be a great cruiser when completed.
Attachment 580722
Printable View
Should be in the garage tomorrow. A stalled, mild restomod project. 1964 Chevrolet C-10 short bed step side. Should be a great cruiser when completed.
Attachment 580722
Well there'ya go Arne ..... Looks like a cool project
I think so, Chuck. The hard lifting is already done. No rust, all new metal where needed, and a pretty nice paint job. Tastefully lowered (about 2"F and 3"R), disc brakes up front and a 305 small block with A-833 3 + OD manual from an 81 pickup. Needs a few final bits and a lot of reassembly.
Won't be killer fast, but it will sound good and cruise nicely. Will fit in with the local Classic Car Cruises better than either of my early '70s Porsches did.
And an entire different group giving the thumb's up.... :)Quote:
Will fit in with the local Classic Car Cruises better than either of my early '70s Porsches did.
AND in these cars you're going slow enough to see their thumbs.... :D
Picking away at stuff. It runs again now, after an intake manifold gasket replacement, and now has brakes, too.
Attachment 581746
And after a mostly complete new wiring harness, it is self-propelled again, albeit VERY LOUD. Comes from having open headers with no exhaust at all on it. Going to talk to some exhaust shops this coming week.
Attachment 583414
Attachment 583415
Exhaust is scheduled for the week after Thanksgiving. Mufflers will be Flowmaster clones, as recommended by the old school shop I'm taking it to.
Exterior is almost wrapped up. Then I'll finish the interior before the final mods - power rack & pinion steering and modern A/C.
Attachment 583872
Attachment 583873
Attachment 583874
Exhaust and other stuff needed for road use (wipers, seatbelts, inside mirror, etc.) is now in place. New power rack and pinion conversion parts are on their way. Still haven't ordered proper fitting wheels yet, but the new tires for them are here.
Attachment 585659
Test fitting the new wheels prior to painting them.
Attachment 586084