Printable View
I´m painstakingly searching the rubber seals which are in the cassis of the 1969-1971 911 S cars and prevent the brass oil lines colliding with the chassis.
Does anyone have an idea where I can get these!
I asked a manufacturer and if I take 400 the price will be at 12 USD!
Help please I need 30 pieces minimum for m and my friends cars!
don't worry.
Search on PET.
Porsche is still produce the part, under other code number and other position.
best
Andrea
no, we looked everywhere and its not on the list!
Hard to tell from your photo, but are these the grommets that are mounted around the hard line where it exits the chassis from the tunnel at the front and back?
If so part number #914 355 651 00
If they are the ones that are mounted in the chassis and protect your brake lines where they exit to your brake reservoir then they are # 999 702 065 50 they are NLA or at least I couldn't find them, I ended up just getting generic ones from a local auto supply house.
I hope that helps
You could use a current rubber grommet from Porsche
Thanks a lot Tom, this would help!Quote:
Originally Posted by tom1394racing
Sorry, but that piece doesn't work.
The right piece is another, and it is on PET.....
Believe me....
I can check the code number only this weekend...
Best
Andrea
bumping this thread. Andrea, can you post the part number please ?. No comment on my question to you regarding the door rubbers !;)
Dave
If there isn't a factory replacement, I think if there was enough interest I know someone that could reproduce them at far less cost than in the first post.
Anybody have the part number or a source for this oil line rubber grommet. ?
No longer available
No.38 on partsheet, Part number 999.702.033.50
Attachment 307010
Attachment 307011
Attachment 307012
The last comment in this related thread may help...
http://rennlist.com/forums/911-forum...s-grommet.html
Did anyone ever come up with a satisfactory solution or at least a diameter measurement of an original as I need some of these now
They are definately NLA just checked
Clyde, i also need these in the next few weeks. Andrea say's in this thread he knows a part number but there is no reply to my request to him on this thread.
Dave Conklin say's he bought some from Asae recently, but i have not checked as yet. Please post up a relevent part number anyone. ????
The old part number which has no superceded part number is/was 999 702 033 50
Thats direct from the factory printed parts manual of the time not a later repro as per the pic in post #11
Looks like off to the local auto shop to buy a few different sizes to try
Try an A/C shop, very similar to generic grommets used for A/C hoses through panels.
Is this a split grommet as in the above posted picture....?? If not, does anyone have a picture of an original as i may have found a source.
Yes it is, hope you have Dave
Might be a false alarm then Clyde. I have asked the question.
http://www.ebay.de/itm/Porsche-911-S...item4aec841ae5
Nothing a blade won't fix��
Sellers reply below Clyde. Solid grommet. I will need to check the measurement.
"ie the inner diameter (small hole) is 15mm, but is stretchy and fits on a 30mm nut.
The outer diameter is 47mm and covers a hole of 40mm. If you buy, you get of course our
bank account! Sincerely urneunelfkonturug"
Dave
Pipe measures 27mm outer diameter, hole measures 47mm diameter
Looks like no good Dave if the plug outer diameter is only 47mm
Try PN 964 207 302 00. It's a dealer only item priced around 10.00 each. PET shows it
Try PN 964 207 302 00. Dealer only item but PET shows it. About 10.00