For a 1968 911 targa
Looking to buy the original style ballast resistor for the engine electrical plate
Also looking to buy a horn relay /ballast relay
And fuel pump L bracket that goes between the plate and pump
Prefer from canada but USA ok
Printable View
For a 1968 911 targa
Looking to buy the original style ballast resistor for the engine electrical plate
Also looking to buy a horn relay /ballast relay
And fuel pump L bracket that goes between the plate and pump
Prefer from canada but USA ok
Hi,
which Bosch Number do you need exactly?
Dirk
I should have most of these parts. PM me with your email for details
pm sent about a week ago, something must have gone the way of the gremlins , no reply yet , here are the picture of what I need
you can try my email at freezing914 at gmail dot com
thanks
Yves
Freezing
Sorry for the delay. I have the two in the lower picture. Sunset Porsche lists the one in the upper photo.
http://www.sunsetporscheparts.com/oe...he/90160285200
I would definitely take the fuel pump bracket
The relay needs to be the black.one
It is used at 2 places. Engine plate and webasto
Do you have the original style ballast resistor
freezing
I have several of these ballast resistors. I do not have the black relay.
Double check but I think in '68 they used the later style ballast resistor. Not the box with the knurled access nut. Experts please check me.
my last production week of my 68 had the the box type.Quote:
Originally Posted by doigthom
-68 box type
MY 69 cylinder style ballast resistor
That is supported by the PET which shows the box type through '68Quote:
Originally Posted by dirk07
I believe the cylinder style ballast resistor (901.602.601.00) came in with the introduction of CDI, although in theory this was at the start of the 69MY, the full CDI kit (901.602.010.00) which includes the cylinder ballast resistor is listed in the 'RS/1' section at the rear of the '1965-68 Parts Catalogue' so was presumably available to order late 68MY?
Tom had the fuel pump bracket
The image is the bhz relay
So still looking for the knurled box type resistor and black relay
But trying to get it all from one place if possible
if you can life with one that has a different number imbossed i have NOS ones...i also have the relays.Quote:
Originally Posted by freezing14
but i`m in austria
My apologies. I now stand corrected.
Tom (doigthom)
Is it just the picture or my eyes
It seems there is 3 different size
The middle one looks like the closest
Sent pm for cost
nope,all are the exact same size.Quote:
Originally Posted by freezing14
let you know details asap
Any news or anyone else
Still looking