64+65 specs genuine porsche rocker panels

this are original porsche parts (91150340206 GRV + 91150340106GRV) convertet to be correct for 64-66 cars

excellent fit as one should expect from original parts.
asking 850€ inc ship and fees i have 5 sets available.

update:all sold

update oct 29th ... doing an other run in a short...

Do you know up to when or what VIN these rockers are correct? (I'm triying to understant if 303040 -BY65, MY66- should have this feature)
lucas

Quote:

---

Originally Posted by Jeager

Do you know up to when or what VIN these rockers are correct? (I'm triying to understant if 303040 -BY65, MY66- should have this feature)
lucas

---

not sure about the exact vin but i think 303xxx don`t have this ones....

Very nice. I had these made for a restoration a few years back. Vin # 300838 Had them.

Quote:

---

Originally Posted by edl0944

Very nice. I had these made for a restoration a few years back. Vin # 300838 Had them.

---

thanks..

anyone seen those on a later car than 300838?

These were on my 66' Feb build. I wish you had these when I was changing mine out.

franz,
are you just having this pair, or are „some more“ in the back?

Quote:

---

Originally Posted by haul

franz,
are you just having this pair, or are „some more“ in the back?

---

made 6 sets
one for #96
3 sold
2 available

bump to top + bump for knowledge

I can confirm with absolute certainty that one of my cars 3035xx has this rocker. Original paint on them still. Was surprised when I pulled the rubber threshold off that it had the early rocker, impressions filled with a white material/filler. No rust repair on the car prior to my ownership. Sorry, don’t have the detail pics on this device. I would guess it’s possible that they switched rockers before my vin and mine could have gotten one of the last off the shelf parts. Much more data needed but mine is the latest car I have seen with early rockers.

I'll take em...PM sent

Thanx,

KJ

Quote:

---

Originally Posted by VintageExcellen

I can confirm with absolute certainty that one of my cars 3035xx has this rocker. Original paint on them still. Was surprised when I pulled the rubber threshold off that it had the early rocker, impressions filled with a white material/filler. No rust repair on the car prior to my ownership. Sorry, don’t have the detail pics on this device. I would guess it’s possible that they switched rockers before my vin and mine could have gotten one of the last off the shelf parts. Much more data needed but mine is the latest car I have seen with early rockers.

---

thanks Mark
yep filled with dirty white(looks like to have some metal powder in it also) early rock hard bondo--applied after paint right?

Quote:

---

Originally Posted by moito

thanks Mark
yep filled with dirty white(looks like to have some metal powder in it also) early rock hard bondo--applied after paint right?

---

Yep, some type of plastic filler like material applied on top of the painted car. Haven’t looked that closely to it yet. I suppose they figured the strength just was not needed and the extra stamp was a waste of effort so it changed in 66.

On this set that Kev just bought I notice they have correct drains in the bottom which is rare to find. I worked with Resto Design to replicate those on their newest gen rockers. So many cars with the poor quality Dansk open drain which always bugged me.

Quote:

---

Originally Posted by VintageExcellen

Yep, some type of plastic filler like material applied on top of the painted car. Haven’t looked that closely to it yet. I suppose they figured the strength just was not needed and the extra stamp was a waste of effort so it changed in 66.

On this set that Kev just bought I notice they have correct drains in the bottom which is rare to find. I worked with Resto Design to replicate those on their newest gen rockers. So many cars with the poor quality Dansk open drain which always bugged me.

---

have a box full of dansk crap rockers that customers bought for there cars but i refused to use--at least there final mission as test carrier for stamping was meaningful

My original rockers

https://image.ibb.co/bzYjVR/66_drive...r_close_up.jpg

3 sets sold
2 available

bump to the top

I have 303165, has its original rockers and floors and the indentations are there

Attachment 447056

Quote:

---

Originally Posted by Kismet

I have 303165, has its original rockers and floors and the indentations are there

Attachment 447056

---

thanks for letting us know..
looks like a decent cage...

Thanks Molto, cage was done by TC Designs in the San Jose area, they have a good reputation.
For reference for those building early cars, here is a picture of the slam panel, as you can see it retains the stampings both sides of the hood/bonnet latch, the aluminum VIN plate attaches to the horseshoe frame above the fuel tank

Attachment 447071

Attachment 447072

bump to top

doing an other run in a short..bump

to the top ... will do an other run soon