Printable View
I am converting my ´68 Nardi wheel from Volvo(?) to Porsche... Does anybody have a hub for an original 65-73 wheel or a damaged wheel I could use the hub from? It would certainly be nice and most correct with a ´68 stamped hub, but not essential.
I know KK sells hubs but would rather use an old original one.
I have just the aluminum hub from a 914 steering wheel, same splines. Please pm with your email if interested.
I sell a billet Momo 230 hub with the standard 6x70mm hole pattern. Please be aware that your Nardi wheel needs a 6x74mm pattern. The necessary hub is much taller than a stock 911 or 914 hub.
Thanks for your reply and offer! The ‘68 Nardi has the old style riveted hub so I think the original Porsche wheel hub fits best.
Here's a picture of what I was trying to express:
Attachment 450851
Thanks, I know what you meen but the back spacere on the old generasjon Nardi are big so a 'flat' hub will fit. It is like this wheel: