Aluminum Control Arm Answer?
Hi Gang,
I'm looking for the definative answer regarding my Aluminum control arms for my 71T conversion car.
I have the control arms, these are the early models with the sway bar ball joints. I have a set of Koni's with the 14mm bolt hole. I have an early (76) Turbo 18mm bar. I've heard:
1. Everything will bolt right up.
2. Everything will bolt right up but you'll need to take the dust cover off the Koni's
3. You'll need to weld in a new rear crossmember with the proper shock angles.
Anybody BTDT before who can offer some insight before I hit the garage and attempt the final install?
Many Thanks!
E.
2 Attachment(s)
Roger to the Rescue (again)
Thanks Buddy,
I have the 26mm bars and adjustable plates sitting on the car waiting to bolt the control arms on.
E.