Printable View
I am in need of an old set of main bearing complete set 1-7
The ID 50 over and theOD 10 over.
This is actually listed as a part from Porsche back in the day. During my rebuild I am having to grind
Crank ther for ID requirement and having to line bor the case there for OD.
PM
Email dlmagruder@icloud.com, best way
404-740-3415
Dave
Pre ‘75?
You may be in luck.
The bearings you need are ID 0.50 mm under (undersize) and the OD 0.25 mm over (oversize).Quote:
Originally Posted by Baxter2012
Your ID number 50 is a reference in millimeters, your OD number 10 is a reference in inches (10 = 0.010" = 0.25 mm).
Jon B.
Vista, CA
Frank sent you a PM as well yes pre 75 it’s a 71 2.2.
Am I in luck, I could use some.
Jon you are correct just trying to find what the builder says I need.
Yes it’s a 2.2 out of a 71
Sorry; no dice.
Only have .25mm/.25mm and .50mm/Std.