Printable View
I am looking for the 30MM compression oil line to hose fittings in straight and 90'S These are like aeroquip compresion type fittings, they can be steel/aluminum or all aluminum type. They were used on the engine and cooler connections. Rthomas@heattfs.com 614-205-7942
I bought one 90 degree fitting but still in need of two straight fittings? Anyone?
I have one. Is this what you're looking for? It's a barbed 30mm straight fitting left over from my front cooler install.
Stoddard may have what you need:
http://www.stoddard.com/shop/shopdis...s+%26+Fittings
Thanks to both of you, these fittings will work but I am trying to match all the other fittings on the car, I am building a 100% authentic 74 slide valve RSR and i am using the silver old school compression fittings. the hose end screws on and is not swedged on. I wish I could post a picture, if someone has an early 911 such as a 72 they could post a picture of the fitting at the engine or oil tank.Thanks Ron
Here are some pix of the hose fittings from my 71E resto project. The old hoses are, I believe, original to the car. The new fittings are the recently purchased replacements.
I hope this helps you and doesn't just ad to the confusion.
regards,
Al
I have one 90 and 3 collars from my '72 project. Would these help?
911scfanatic, those are the ones! That is a 90 degree fitting I would like to buy it from you but I still need two more straight fittings. I am confused because in my left over 1965 911 parts bin it has the crimped fittngs also on the old oil lines? Did they switch from crimped ones earlier then to the screw compresion type then back to crimped?:confused:
Ron, just PM me your address and they are yours gratis.
Happy New Year.:)
Does anyone any have any of these collars for the old style screw on fittings. I have the ends but cannot find the collars?
http://www.early911sregistry.org/for...1&d=1231123631
http://www.early911sregistry.org/for...hlight=fitting
I have some complete fittings as well...in that place called 'somewhere' :D
Like these?Quote:
Originally Posted by CheckBookChuck
YES!! all I need are the Collars. Do you have (4) you can part with?
Call Chuck 5108121140
I am sure I can come up with (4).
PM or email me for details.
If you don't find what you need you can buy new collars from JimmyT on the bird
Attachment 477202
Thanks for the info Jeff. I want to go with the old stuff as the car is completely original.
Chuck
How about this set? The two on the left are for the engine to tank hose and the two on the right are for the cooler to tank hose.
I will PM you the details.
Anyone have a screw-on 90 degree oil line hose end for the larger diameter oil line between the oil tank and the cooler?
Need ASAP. Chuck (510) 812-1140
Does one need a special machine to connect these pieces to tubing?
No, i need the stock fitting at the tank. You have one?
No. These are 'field-serviceable'. All that is needed to hold them is a vise and wooden blocks. Just another silent reminder of the unfortunate shift towards our disposable culture.Quote:
Originally Posted by 72targa