2.7 RS hp on a Dyno????

I recently had my motor and MFI rebuilt to 2.7 RS Spec. I know from the books it is supposed to be a 210 hp motor.
I am considering taking the car to Dyno Technology. They put your car up on the rack, give you print outs of your actual hp and ft-lbs of torque. The PCA/OC Region had an open house there recently.
What hp and torque should my motor be putting out "at the wheels?"
Thanks, Ray

Ray,

Mine was 196hp @ 6300 rpm in 3rd gear to the rear wheels on the chassis dyno we had at Fletcher Jones Mercedes when I worked there.

All the best!

Roger

Mine was 187HP at 6300 to the rear wheels in 4th gear on a Dynojet. With 15% drivetrain loss that's about 220 HP.