Hi guys on the pet it’s just shows hose as the bushing with a bolt but I have
Seen a single threaded stud one end and the other end to take a bolt .
I have a Lwb 69 any ideas boys
Thanks
Printable View
Hi guys on the pet it’s just shows hose as the bushing with a bolt but I have
Seen a single threaded stud one end and the other end to take a bolt .
I have a Lwb 69 any ideas boys
Thanks
Please be more specific as to what you are talking about.
Bob B
Hi bob thanks for the reply , it the electrical panel on the left in the
Engine bay . It’s the rubber / bush that holds it to the body .
Thanks
#4 below you mean?
Attachment 564136
Jonny,
I used a piece of soft fuel hose cut to length. I did the same for the fuel console.
My car has 4 rubber washers in the wheel well and 4 behind the panel. The ones in the wheel well are about 5 mm thick, 16 mm dia. and 6 mm hole. The ones behind the panel seem to be thicker. I will pull one out tomorrow and take a pic.
Stoddard wants over $7 for part #4 above.
Bob B