I've searched far and wide here and elsewhere, but haven't been able to find anything on how to do this. I found the obscure bulb the radio takes:
https://www.bulbworks.com/light-bulbs/3370
But nothing on how to change it. Anyone know the drill?
I've searched far and wide here and elsewhere, but haven't been able to find anything on how to do this. I found the obscure bulb the radio takes:
https://www.bulbworks.com/light-bulbs/3370
But nothing on how to change it. Anyone know the drill?
Hi, you have to take off the chrome bezel, and the part behind that whith the glass. Then set the dial to (here is the problem I don't remember whether it's left or right) the most (left/right) position.
Then you can take out the black part behind the scale (a small screwdriver will help) then you see the bulb - it is mounted at a slight angle and can be pulled out.
If you can take the radio out of the car it's easier as you can take the top lid off and see what you're doing.
Hth
Uli
There are just about as many different ways to change a light bulb in a Blaupunkt radio as there are different models. Take a picture of your radio and we can then suggest a way to do it.
Regards
Jim
Ok
Turn the thing to the most left position
Press a knob, only so far that all are released out position. (Not one of the AM/FM... is pressed)
Remove chrome bezel
Remove glass (open from top)
Here is the point to lever with a small screwdriver (having the glass removed first)
pull out on the right side (a lip of it is in a small slot on the left side)
now move it to the right so that you can move it around the back of the needle (indicator? hand? don't know the english word)
here you are
If you haven't got it installed in your car you can remove the top cover and help getting the bulb out from the top.
TRY THE NEW BULB FIRST BEFORE RE-ASSEMBLY
Then Re-assemble in reverse order
Thank you! Really appreciate it. This is the original radio to my car and has never been removed before, so I'm going to try to replace the bulb with the radio in.
It's right there in the title of the thread, the Frankfurt model. Or maybe there different variants of that model?
If your bulb looks like the one in the picture, then it is spring loaded so just push in and lift up reverse for install. Some also have a plastic white sleeve that the bulb sits in and the whole sleeve comes out (squeeze the sleeve together and pull out).
Mike Fitton # 2071
2018 911S Carrera White
2012 991 Platinum Silver ( Gone)
1971 911T Targa Bahia Red (Gone to France)
1995 911 Carrera Polar Silver (Gone)
No Affiliation with City of Chicago!
Reviving this old thread
I cannot find a 7 volt bulb with the bA7s form factor. Looks like the choice is a 12v or 6v.
techweenie.com
My parts fetcher: 2016 Tesla S | Currently building: 73 RSR tribute and 69 RS tribute
have you looked in the store for children electric railway trains?
just my 2cts
59 750 pre unit triton
63 650 gray silver bikinitub triumph thunderbird
70 650 astralred silver triumph bonneville
65 912 slate gray "erwin"
73 914 ravennagreen "ferdl"
erwin_loves_polo